If you want to buy a jack but don’t know what size floor jack for Toyota Tundra, fret not, we’ve got you covered.
This blog post presents the best floor jack options for your Tundra, along with a complete buying guide that includes information on the size, lift range, and pump type of the jack.
Let’s get started!
What Size Floor jack for Tundra
The size of a floor jack should be determined based on the weight of the vehicle it will be lifting, as it needs to have enough capacity to easily raise the load. The safest option is to choose a jack with a higher load capacity than the Tundra’s weight, although an equal capacity jack can also be used.
The Toyota Tundra weighs around 6000 lbs, which may vary depending on the specific model. To lift the truck safely, you will need to use a 3-3.5 ton floor jack, which can lift loads of 6000-7000 lbs, exceeding the weight of the truck.
In the case of jacking up one wheel of the Tundra, a floor jack with 75% capacity of the truck’s weight can be sufficient, as that one tire will obviously weigh less than the whole vehicle, falling within the capacity range. A 2.5-ton jack will be suitable in this case.
However, if you are looking to purchase a new floor jack, it is recommended to opt for a 3 or 3.5-ton jack for the Tundra, as this is the safer option.
After considering the lifting capacity, the next important factor to consider when choosing a floor jack is the lift range. This refers to how high the jack can lift and the amount of clearance required for its installation. However, in the case of the Tundra, its minimum clearance of around 10 inches should not be an issue.
Most floor jacks have a collapsed height of around 5 inches, allowing for easy installation under the truck. However, in this case, the maximum height is what matters. This will ensure that there is enough space for stand installation and for you to maneuver underneath the truck.
It is important to choose a jack with a maximum height of 18 inches or more, as this will provide enough room for stand placement and for you to access the underside of the truck. The higher the maximum height, the better it is.
When selecting a floor jack for your Tundra, it is recommended to choose a dual-piston jack. This type of jack can lift the load much faster compared to a single-piston jack. The pump system can be either single or double, but there is a price difference between the two.
A dual-piston jack is more expensive, with prices ranging from $200 or more depending on the brand. However, the higher price tag is justified as it saves you time and energy during use. In contrast, a single pump jack will cost around $150.
Handle & Saddle
When it comes to the pumping handle, it is recommended to choose a jack with a longer handle for easy maneuverability and stroking. Most brands also have rubber padding on the lower part to prevent any dents on the car in case it hits it. The handle is often made of two pieces for easy storage and movement of the jack.
While some jacks come with two side handles for lifting and carrying, this is not a crucial factor since the jack will mostly be rolled over the garage and can be heavy. However, having side handles is still a plus point if the product has them.
The padded saddle is another important feature to consider when selecting a floor jack for your Tundra. This part of the jack touches the jack point when lifting and enables a strong grip. The saddle is typically circular in shape, and a wider saddle provides a better grip. Ensure that your floor jack has a padded saddle on top.
Tundra Floor Jack Material
Aluminum jacks are more expensive but are worth the investment. The lighter weight makes them easier to maneuver and position, which is especially important if you plan to use the jack frequently. They are also less prone to rust and corrosion than steel jacks, which makes them more durable in the long run. However, if you don’t plan on using the jack very often, then a steel jack could still be a viable option as it will save you money upfront.
Best Jack for Tundra
Now that you know about some of the key features of a floor jack, let’s go through a product that has almost all of the mentioned aspects. This will help you narrow down your selection and make a decision.
The VEVOR K500 floor jack is one of the best floor jacks for the Toyota Tundra because it can easily lift the truck as it falls under the weight capacity. It can lift up to 6000 lb max, which is more than enough for the Tundra’s weight of 5000 – 6000 lb.
The product allows you to extend it to its maximum height of 19.7 inches, leaving ample room for either placing a jack stand or crawling underneath. The minimum height is also within range and can easily slide under the truck.
However, this product is made of steel, not aluminum, which makes it less expensive but also heavier. You don’t even need to pick it up because it has wheels that roll over the garage. With that said a dual-piston floor jack can be a good choice for Tundra owners. You can find more information about the product at the link below.