What Size Floor Jack For Subaru Outback

What size floor jack for Subaru Outback
Photo : Flickr

After reading this short blog post, you will find the answer to the question What size floor jack for a Subaru Outback?”

In addition, a complete buying guide that includes lift range, pump and jack type, design, and load capacity is also provided. At the end of the article, a floor jack that meets the criteria will be recommended so that you can make an informed purchase. 

Let’s dive in.

 VEVOR K496 Floor Jack for Subaru Outback

  • 5000 lb load capacity
  • 3.6 – 19.5″ lift range
  • Dual pump
  • Weight: 65 lbs 

Choosing the Right Size Jack For Subaru Outback

Jack Size

To determine the appropriate size jack for your Subaru Outback, you need to know its weight, which can vary depending on the model. According to our resources, the SUV weighs around 4000 lbs. To ensure safety and efficiency, a 5000 lb floor jack is recommended to lift this much weight. You can use a 2.5-ton jack to raise the car.

Jack Range

The lift range is another factor to consider when selecting the appropriate size floor jack for your Subaru. Make sure you can install the jack underneath by checking its minimum height. The SUV has 8-9 inches of ground clearance, and most floor jacks have a minimum height of around 5 inches. 

This means that any jack with a minimum height lower than the ride height of the Subaru would be a good fit. On the other hand, the extended height matters when installing the jack stands. You should allow enough height for them to fit in. 

Lifting Pump

If you have the budget, it is recommended to opt for a two-piston pump in a floor jack. These jacks are worth the extra cost due to their faster lifting and efficiency. The floor jack mentioned below also has a double piston. Make sure to take a look at it.


Although all floor jacks have the same design, it is still important to inspect the materials used, saddle width, and base area. Steel jacks are heavier than aluminum models, but they are generally cheaper. A wide circular saddle with a rubber pad on top can also enhance the overall functionality of the jack.


There are several types of jacks available, including scissor, bottle, electric, and floor jacks. For the Subaru Outback, we recommend a floor jack as they are the most commonly used tools among the other types of jacks. Their lift range, capacity, pump system, and sturdiness make them a top choice.

Best Floor Jack for Subaru Outback

The VEVOR K496 is the best floor jack for the Subaru Outback as it can lift up to 5000 lbs, including the SUV. Its rapid rise mechanism allows you to reach its maximum height with fewer pumps, saving your time and effort with the dual pump jack.

With a minimum height of only 3.6 inches, this product can be smoothly installed under the Outback, making it suitable for the 8.5 inch ground clearance. When fully extended, it reaches almost 19 inches, leaving more room for the stands.

Made of steel, this floor jack weighs 65 lbs. However, you do not need to lift it when moving it as its four wheels allow it to roll easily over the floor, making it easy to transport between your work area and storage.

You can find more information about this jack, including its ratings, reviews, price, and more through the link given below.

Leave a Reply

Your email address will not be published. Required fields are marked *