Are you browsing for the best motorcycle lift for your Harley Davidson? If so, you’ve come to the right place. This article has compiled a list of the top motorcycle lift tables for your Harley Davidson.
Since motorcycles typically have low ground clearance and most riders may struggle to fit a lift underneath, we have listed lifts with the lowest height possible to make it easier for you to slide them under your motorcycle. Therefore, there’s no need to worry about the fitment.
Let’s first go through an overview of the lifts.
An Overview of the Motorcycle Jacks
Best Motorcycle Lift for Harley Davidson Cruiser - OTC 1545
- The jack comes with a two years limited warranty.
- Long T-handle, no need for bending over to move the lift.
- Smoothly slides under Harley since it has only 8.9 cm minimum height.
- Pedals deliver easy operation, lifting, and lowering.
- Minimum Height: 3.5 inches
- Extended Height: 16.75 inches
- Load Capacity: 1,500 lb
- Material: Alloy Steel
- Color: Black & Silver
- Weight: 90 lb
- Dimensions: 20 x 6.5 x 39.25 inches
- Skid Area: 14.5 x 17-inch
- Part No. 1545
- If you’re not good at DIY, you may not easily put all the parts together since the product comes in a few parts – bottle jack, handle, and lift. However, a detailed instruction manual you’ll get with it will be handy in getting it to work.
The OTC motorcycle lift has a collapsed height of 3.5″ (8.9 cm). Most Harley-Davidsons have a ground clearance of 5.7″, which means you can easily slide this jack underneath your Harley. So, the first issue has been resolved.
Furthermore, this lift has a load capacity of 1,500 lbs, which means it can easily lift the bike since its weight is much less than the jack’s lifting power. You can extend the product up to 16.75″ (42.5 cm), which means you can lift your HD almost one and a half feet off the ground.
This OTC model has two pedals that raise and lower the jack. Such features allow you to lift or lower your HD while standing and holding the T-handle. The handle also makes it easy to roll the lift around your garage with its 360-degree swivel casters.
The OTC motorcycle lift also has a unique feature in addition to its mobility function. It has locks that keep the jack in place while your HD is being lifted. The model also has an auto safety lock that acts as a jack stand when you raise your Harley to the desired height.
However, it doesn’t come fully assembled. You’ll need to connect some parts, such as placing the pump in its position. But that’s not a big deal since you can consult the instruction manual for guidance.
The jack comes with straps so that you can tie your Harley down for a secure lift and drop. It weighs 90 lbs (40.8 kg), which is heavier. However, since this is a garage tool, there’s no need to transfer it from one place to another, so the weight issue won’t be a problem.
VIVOHOME VH049 Motorcycle Jack - Best for HD Touring
- This four-wheel jack can be easily maneuvered from one place to another.
- If you don’t have more space in the garage, the jack can be collapsed by separating the bottle jack and the handle.
- It can be locked at three different positions, meaning you can lock your motorcycle at three different heights. Lock it at whichever height suits your height.
- Minimum Height: 4.5 inches
- Maximum Height: 15 inches
- Rated Capacity: 1,500 lb
- Material: Alloy Steel
- Color: Black & Red
- Weight: 57.8 lb
- Size: 27.5” x 14” x 15” inches
- Lift Area: 14” x 12.5” inch
- No. of Straps: 2
- Handle: 23.5 inch
- Part No. VH049
Introducing the VIVOHOME motorcycle lift, which can lift up to 1500 lbs, making it suitable for lifting Harley Davidson. It’s designed to easily jack up your Harley and can fit under its clearance.
The product features a minimum lift height of 4.5 inches, and since the HD’s ground clearance is around 5.7 inches, there’s no need to worry about installing the jack. The lift can raise motorcycles up to 15 inches off the ground, providing ample space for tire changes. However, such height isn’t required for installing a spare tire.
The lift is easy to operate, thanks to the foot pedal. You don’t need to sit or use a wrench to raise it. Simply put your foot on the pedal and pump the jack a few times to lift your Harley.
If you’re concerned about the motorcycle falling off while being lifted, the package comes with straps that you can use to secure it. In addition to a handle and two straps, this model also features swivel casters, making it easy to move around your garage.
Once you’ve raised the jack, you can lock it to prevent unexpected lowering. The mechanism features a 3-position lock system, allowing you to lock it at three different heights.
The VIVOHOME motorcycle lift is made of steel and offers several other features that make lifting your Harley Davidson easier. If you’re interested in this model, click below to learn more about its price and ratings.
BIG RED T64017 Torin Hydraulic Jack - Best for HD Softail
- This Harley Davidson jack can be locked at 6 positions, locking your Harley at 6 different heights.
- Multiple strap posts or hooks allow you to tie the bike with any part you want.
- The rear two swivel caster can be locked to add further safety.
- Durable jack because of powder-coated finishing.
Check out this BIG RED jack, one of the best motorcycle lifts for Harley Davidson. It features the same load capacity as the first two jacks above – 1500 lb. It enables you to quickly raise your Harley over 16 inches off the ground, leaving enough space for a tire change or repair.
Most motorcycle lifts have the issue of not fitting under Harley because their collapsed height is more than the clearance. With the BIG RED jack, you won’t have this problem since it has a 13 cm min-height, which is lower than Harley’s clearance – 14.5 cm.
You can lock this product at different heights so that it does not collapse while you’re working on your motorcycle. It does not come with straps, but it has multiple spots where you can fasten the bike.
This item has a powder-coated red exterior that delivers long-lasting durability while enjoying a one-year warranty. It’s perfect for jacking your motorcycle, but it comes with a few drawbacks listed below.
Since the previous jacks feature pedals for both raising and lowering the load, this jack features a pedal for rising only, not for lowering. It has a release valve that lowers the load upon rotating. It also comes with a pulling bar, which has a hook at one end. You’ll have to grab the jack with the hook to move it over the floor. It does not feature a T-handle like the previous jacks. However, both tools are handy for moving the bike, so it’s not a big issue.
With these features, the model is inexpensive and has received numerous applause from multiple users. You can see its price and ratings by clicking the yellow button below.
Best for HD Sportster - Ramp Motorcycle Jack from Titan Ramps
- Long and wide top surface for the motorcycle to park up.
- Foot pedals allow easy lifting, and lowering.
- Its rough surface increases friction, lowering the sliding.
- Features two strap ports for tying down the motorcycle for added safety.
- Size: 84.65 x 23.43 x 8.66 inches
- Lift Ramp Dimensions: 81.25 x 21.50 inches
- Approach Ramp Dimensions: 24.5 x 21.50 inches
- Weight: 293.22 Pounds (133 kg)
- Color: Red
- Rated Capacity: 1000 lb
- Minimum Height: 8.5 inches
- Maximum Height: 34 inches
- Material: Alloy Steel
- Part No. MOTOLIFT
This Titan Ramp motorcycle lift is unique compared to the rest of the list. It has an 81.25 x 21.50 inch top surface area where the motorcycle will be parked, tied, and raised up. It’s not like other jacks that lift a bike from the center.
You will need to climb up your Harley onto the jack through the approach ramp. The ramp has a 24.5 x 21.50 inch approach, enough for smooth climbing. With its 8.5 inch minimum height, this jack features almost 34 inches of maximum height, providing more than enough height for making repairs or changing tires on the motorcycle.
Just like other products on the list, this one also has two foot pedals for raising and lowering. It’s a bit heavier and bigger than other models, but it can be easily moved around on its wheels, and in its collapsed position, it occupies less room.
With over 107 positive ratings online, this jack is expensive and costs more than most motorcycle lifts. You can check its price on Amazon through the button provided.
Extreme Max Motorcycle Lift Table for Harley Dyna
- The lightest scissor jack on the list.
- Wider lifting platform, hence more contact area with the motorcycle.
- A strong steel frame delivers safe operation.
- Does not feature wheels, However, a separate dolly can be purchased.
- Minimum Height: 3.4 inches
- Maximum Height: 14 inches
- Rated Capacity: 1,000 lb
- Material: Alloy Steel
- Color: Red & Black
- Weight: 27.8 lb
- Operating Wrench/Socket No. ⅞ inch
- Size: 18 x 10 x 4 inches
- Lift Area: 15-1/8” x 9”
- Part No. 5001.5044
Moving on to the next lift table, we have the Extreme Max lift. Unlike the previous model, which has a hydraulic pump, this lift has a manual operation. You’ll have to raise or lower this jack with a ⅞” wrench or socket. Though you’ll operate it with your hand, it’s much cheaper than the other jack on the list.
The lifting power, 1000 lb, is also less than the previous jack but still suitable for Harley. On the other hand, its weight is 27.8 lb (12.6 kg), much less compared to the first model. You can also pick it up and carry it around because of its lightness.
And you’ll need to do that because the lift doesn’t have steel casters and a handle for rolling it around the garage. This product comes with a one-year warranty and a 14″ (35.6 cm) maximum lift range. Meaning, you can lift your Harley up to 14″ off the ground, giving more room under your HD for repair or tire changes.
The lift table has a 15 x 9 inches lift area with the same size base, providing strong support as well as a secure lift. Like the previous one, this model is also easily slid under your HD because of its 3 ⅜” collapsed height.
It has a rubber-padded lift surface to increase the friction that prevents tipping over. However, this jack doesn’t come with a wrench. Nor can you operate it with a power drill. You’ll have to get a separate wrench for it.
Goplus Motorcycle Hoist 1500 LB
- Features the highest max lift height on the list.
- Beautiful black stylish design.
- With over 293+ positive ratings on Amazon.
- Deep treads on the lifting platforms increase friction, lowering sliding.
- Minimum Height: 5.5 inches
- Maximum Height: 17 inches
- Rated Capacity: 1,500 lb
- Material: Alloy Steel
- Color: Black
- Weight: 70 lb
- Size: 32.5 x 16 x 5.5 inches
- Lift Area: 13 ⅜ x 2 ⅞ inches
- Handle Rod Height from the Ground: 36.5 inches
- Rod Length 10.5 inches
Introducing the Goplus lift, which is the same as the OTC model but has a few unique features. This jack can be extended up to 17 inches, almost one and a half feet, and has a higher original height compared to other lifts on the list, 5.5 inches (14 cm), yet you can install it under your Harley.
You can use a piece of wood or anything under the jiffy stand to increase the ground clearance if needed, but it won’t be necessary.
Like the first lift table, the Goplus jack also has a 1,500 lb (680 kg) load capacity and weighs 70 lb (31.8 kg). Additionally, it has three locking positions at different heights, with the first one at 7 inches and then progressively higher.
After locking the jack, your motorcycle will safely rest without worrying about collapsing. Check out more about this model from the button below.
Expert’s Guide on How to Choose a Motorcycle Lift for Harley Davidson
After reading the above product’s review, if you still need a comprehensive guide on how to choose a motorcycle lift for your Harley Davidson, you’ve scrolled to the right heading. Let’s hear it.
What should I look for in a motorcycle lift?
Look for the following features in a motorcycle lift for Harley Davidson or any other bike. Since this article is about HD, we’ll explore each feature of a lift, matching with Harley.
Load Capacity of the Jack
The load capacity is a feature of a lift that indicates how much weight the jack can lift. Most lifts have a load capacity of 1,000 to 1,500 lb. It’s important to choose a jack with a load capacity higher than your Harley’s weight.
Therefore, you need to know your bike’s weight first. According to Google, a Harley Davidson weighs around 900 lb, but you should consult your manual for the accurate figure, which will be under 1,000 lb.
All of the lifts we’ve mentioned above have a load capacity higher than 1,000 lb, with some having a 1,500 lb capacity. This means that if you choose any of the above motorcycle jacks for your Harley, it will have the required load capacity.
Collapsed Height of the Lift
The next thing you need to consider is the minimum height of the lift. What is its lowered height? This is essential when it comes to Harley Davidson because they have low ground clearance. If you want to lift your Harley with a jack, the lift should have more clearance than the motorcycle’s minimum height, or the lift should have a lower height than Harley’s clearance. Only in this case will you be able to slide the lift under the motorcycle.
It’s common sense. If the lift you’re going to buy has a minimum height higher than Harley’s ride height, how will you place it under the bike? So for this reason, all the products that we’ve gathered in this article have a lower minimum height than Harley Davidson’s clearance.
This is one of the main issues that bikers come across when they want to lift their motorcycles with any jack. They don’t check the collapsed height. Harley-Davidsons have around 5.7 inches of clearance, which you can find in the manual. Therefore, you should find a lift with a minimum height of 5 inches or less.
Thanks to this article, you now have jacks with 3.5 to 5 inches collapsed height lifts, so you can easily place them under your Harley. That’s why they’re tagged as the best motorcycle lifts for Harley Davidson.
There are more features to consider, but they’re not as important as the two mentioned above. When a jack meets the above features, you can pick it up for your Harley.
How do you lift a Harley Davidson at home?
Want to lift a Harley Davidson at home and don’t have a clue how to do it? If so, let’s lift your Harley together.
You Need a Jack
Find a motorcycle lift. If you have an old one in your garage that can do the job, use it. If you don’t have one, you can find some of the best motorcycle lifts for Harley Davidson in the review section above.
Raising your Harley without using a lift can be riskier, which is why it is always recommended to use a jack.
Park the Harley on a Solid Ground
Assuming you have access to the lift, the next step is to find solid concrete ground, preferably in your garage. Park your motorcycle there and let’s move on to the next step.
Gather Some Straps
You will need some straps to tie down your Harley with the jack since it has two wheels and won’t be as stable as a car. Use the straps to secure the motorcycle to the jack. The jacks mentioned above have straps, so there’s no need to buy or look for separate ones. This is a plus point with the purchase.
Slide the Jack Beneath the Motorcycle
Now slide the motorcycle jack under your Harley. Make sure the minimum height of the jack is less than the ride height of the motorcycle. This is an easy step, and if your lift has casters, the sliding will be quicker and easier. Use the straps to tie down your motorcycle with the jack.
Start Pumping the Pump
Using your foot, keep pressing the pedal so that the pump raises the lift and lifts the motorcycle. The lifting speed will depend on your hydraulic pump, but it won’t take much of your time. With a few pushes, the Harley will be lifted high enough so you can do your job.
Get the Job Done
Once the Harley is lifted, you can get your job done, whether it’s replacing a flat tire, brake pads, or anything else. Without worrying about the lift collapsing, you can replace the flat tire. Just make sure to lock the lift at the desired height before getting into the work.
Lower Your Harley
When you’re done with the work, unlock the jack, and then slowly press the lowering pedal. The jack will come down along with your Harley Davidson.
Lifting a motorcycle may vary with the lift, so make sure to check the product’s manual for operation. There could be slight differences, such as one jack having one pedal and the other having two, so use it accordingly. Always read the manual before operating it.
Can you jack up a motorcycle?
Of course, you can jack up your motorcycle. You will need to use a proper lift to raise it. The lifts reviewed in this article are perfect for jacking most motorcycles. They are low enough that you can easily slide them under any motorcycle. And their load capacities are sufficient to lift most motorcycles out there.
What is the best jack for a Harley Davidson?
The OTC 1545 motorcycle lift is the best jack for Harley Davidson. It has a 3.5 inches minimum height. And you can easily install it under your HD, which has around 5.7 inches of ground clearance. The lift has a 1500 lb load capacity, for lifting Harley Davidson. You can find more about this OTC 1545 jack in the review section above in the article.
In conclusion, we have reviewed the best motorcycle jacks in this post. They all have almost the same features, except for the third one. At the top of the list is the OTC model, which has a lifting power of 1,500 lbs.
This product also has the lowest collapsed height on the list – 3.5 inches. If you want to pick one from the list, look no further and choose the OTC model. If you want to see how other users have experienced this model, click the yellow button to check it out on Amazon.