Looking for the Pro-Lift F-767 grey low profile floor jack review? Well, this article will unbox all of its features so you have a detailed clue of this Pro-Lift F-767 floor jack before you make it yours.
Let’s get started.
- Load Capacity
- Minimum Lift Height
- Maximum Lift Height of Pro-Lift F-767 Grey Low Profile Floor Jack Review
- Hydraulic Pump
- Mobility & Carrying Handle
- How Do You Use a Pro-Lift F-767 Floor Jack?
- [Video] Pro-Lift F-767 Floor Jack Review
- Pros and Cons of Pro-Lift F-767 Floor Jack
- What does low profile mean on a floor jack?
- Are Pro-Lift jacks good?
- How much does a pro Lift floor jack Cost?
- The Verdict
Pro-Lift F-767 Grey Low Profile Floor Jack Review Key Features
All the key features of the floor jack have been discussed below. Match them with your needs – car or truck. And see whether this will fulfill your requirements or not.
The first factor in the Pro-Lift F-767 is its load capacity. Before that, it’s important to know about your car’s weight as well. So that you get an idea of whether this floor jack can lift your car. This is super important because most new buyers opt for a model that has less lifting power than their vehicle’s weight.
This Pro-Lift floor jack has a 2 ton (4,000 lb) load capacity. This means that you can raise up to 4,000 lb (1814.4 kg) with this model. You should choose this model if your car weighs below this jack’s capacity, which most unibody vehicles do.
If its weight is slightly more than the jack’s capacity, you still lift your car with it. Say, your vehicle weighs 5000 lb, you can jack one corner of it for a tire change with this model since the load divides. You cannot lift your whole car at once. Nor there’s any central jack point that will be handy in this regard.
So this floor jack is fit for changing tires or oil where you need just one or two corners of your truck to be lifted. And let alone a car with under 4000 lb weight. That’s nothing before this model.
Minimum Lift Height
Now that you would have probably cross-checked your car weight with the jack’s capacity, let’s see another essential factor that even needs double-check, minimum lift height. If you have a low-profile car, this factor should be your first step to look for in a floor jack.
The min-height enables you to easily slide the jack under your car, which needs some space to be installed. You cannot slide this jack under a low-profile car like a Corvette that features 2.75 inches of ground clearance.
The Pro-Lift F-767 floor jack has a minimum height of 3.50 inches (9 cm), making it perfect for most vehicles. If your vehicle has a 9+ cm clearance, you can surely lift it with this jack. But if the clearance is lower than 9 cm, this would not be the best choice for you.
We want you to get the right and perfect floor jack that meets your needs. And this floor jack is not ideal for low-profile vehicles with under 3.50 inches clearance. You can find many low-profile vehicles in the market that are as low as 2.75 inches in height. We will link to that below.
Maximum Lift Height of Pro-Lift F-767 Grey Low Profile Floor Jack Review
If this floor jack is not perfect for Corvette-like low clearance vehicles, it’s not the best jack for most trucks as well, let alone lifted trucks. That’s because trucks and lifted vehicles have higher ground clearance – more than 18 inches. And this model will not even touch a jack point at such a height.
The Pro-Lift F-767 features a 14 inches (38 cm) maximum height. You can extend this jack to 14 inches. Or in other words, you can lift your car 38 cm off the ground with this model. That’s why we’ve mentioned earlier that this jack may not be the right choice for lifted trucks.
If your truck has 15 inches plus clearance, you can guess how it will lift your truck if it cannot even touch it. You can use some blocks or woods below the jack to gain some height, but if you can find 24 to 30 inches max lift height floor jacks, why opt for low max height jacks. We’ll link to that below.
Since you won’t be working without a jack stand, it should be lower than the jack’s max height. If your jack stand has 14 inches plus height, you won’t be able to install it under your car using this Pro-Lift F-767 floor jack. You need more height.
Concluding this factor, this jack can be extended to 14 inches. And it makes it perfect for most unibody vehicles or SUVs. Because they have around 8 – 12 inches ride height. You can easily change a tire or do any repair in the vehicles using this floor jack.
The Pro-Lift F-767 floor jack has a single-piston pump system. It can lift your car but it will need a few more strokes to do so. A single-piston pump lifts a load slower than a dual-piston. By slower, it means around 10 strokes to get to max height.
If you want to extend this jack to its max height, you will need more strokes. But that’s not needed in most cases. If you want to change a tire, you will just need fewer strokes to lift your car high enough so you can remove the tire.
You will need all that 14 inches of clearance when you want to get under your car. So in that time, you will need a few more strokes to extend the jack. While a double-piston floor jack goes to its max height in around 5 full pumps. That’s just for saving your few seconds and nothing more.
When it comes to the jack’s saddle, it’s not of that big size as in other floor jacks that have 4 – 4.5 inches wide saddle diameter. This is the only part that comes in contact with your car’s lower portion. It should be of a bigger size to securely lift the load.
The grey floor jack features around 2.5 inches saddle top, which does the job and safely raises your car. But it would be great if the saddle was at least 4 inches. This is a drawback in this Pro-Lift F-767 floor jack.
It also comes with no rubber pad on its top. But hey! This saddle can for sure lift your vehicle. And it has over 5136 positive reviews online. You can check that out by clicking the button below.
In lifting a huge weight, safety is most important for you and your car. The Pro-Lift F-767 model has some cool features that will be handy for safe operation. It features a bypass device that saves the jack from overpumping.
If in case you overpump the jack than the required strokes for reaching max height, the jack will take care of itself. And it protects itself and the pump system against overpumping.
As you know that you should not lift more than its rated weight, this model will not lift a heavy load than its capacity. It has an internal built-in safety valve that gives overload protection in such cases. And for user safety, the jack will come down safely upon release due to its safety release valve.
Also, when you want to use this jack, look for solid ground and park your car there. Your garage is the best place for jacking your vehicle. Chocking the opposite wheels that you don’t want to raise is also handy for lifting your car safely.
Mobility & Carrying Handle
The Pro-Lift floor jack has two front casters and two rear wheels that help with mobility. You can easily roll this jack over your garage floor and can position it under any jack point. The model is lighter than most floor jacks. It weighs just 30 lb (13.6 kg).
You can easily carry it around because of two reasons: It’s a lightweight floor jack. And the second reason is that it features a black carrying handle. Just grab the jack from the handle and move it from one place to another.
The jack’s lever is a bit smaller and is not as long as in other floor jacks that have 50 inches handles. It is smaller and would be better if it was at least 35 inches. But the handle is of enough size to easily pump the jack.
How Do You Use a Pro-Lift F-767 Floor Jack?
Using this floor jack is as simple as jacking your car with other dual piston models. When you want to raise your car with this floor jack, follow the simple steps given below. And lift your car safely.
- Park your car on solid ground, ideally in your garage.
- Position the jack under a jack point where you want to raise your vehicle.
- Pump the jack high enough so you can place a stand.
- The stand should be less than 14 inches.
- Once you’ve installed the stand, lower the jack. And the load will rest on the stand.
- When you want to remove the stand, again raise the car with the jack and remove the stand.
- Then slowly rotate the handle and the jack will come down and so does the car.
[Video] Pro-Lift F-767 Floor Jack Review
Pros and Cons of Pro-Lift F-767 Floor Jack
- Lightweight floor jack
- 3.5 inches minimum height
- Carrying handle
- Features safety valves
- Single-piston pump
- Small lever
What Does Low Profile Mean On A Floor Jack?
Low profile means in a floor jack that such jacks could be installed under low profile vehicles. A low profile feature in a floor jack depends on the minimum lift height of the jack, which could vary. Low-profile floor jacks have 2.75 to 3.50 + minimum height.
Before you opt for any low-profile jack, you should check your car’s ground clearance first. If your car has 2.75 inches clearance like Corvette has, opt for a jack that you can install under such height. In this case, a 2.75 inches min-height floor jack is the best option.
The Pro-Lift F-767 low-profile floor jack has 3.50 inches or 9 cm minimum height. This implies that you can install this model in a car of 3.50 inches plus clearance.
Are Pro-Lift Jacks Good?
The Pro-Lift F-767 floor jack has won countless applause online. It has gathered more than 5000 positive reviews on Amazon. Such ratings show that the Pro-Lift jacks are great for lifting a load. They feature safety valves for secure operations.
It will give you a 14 inches height under your car if you extend it to its max height. Plus, you can install the model under 3.50 inches ground clearance. They cost less compared to other floor jacks. It’s a high-quality floor jack.
How Much Does A Pro-Lift Floor Jack Cost?
The Pro-Lift F-767 floor jack costs under 80 bucks. It’s a single-piston pump with a 4000 lb load capacity. But other models of the brand cost more than 100 dollars. And they obviously have more features. Their load capacity will be more and will have a rapid rise pump.
The Pro-Lift F-767 floor jack is one of the best and top-rated floor jacks that you can find online. It has won countless applause and delivers great operations. It’s a 4000 lb floor jack that has as low as 9 cm in height. If you are a DIY person and make regular maintenance in your cars, be it tire change or oil change, this jack is for you. It cost less than 80 bucks and is worth the money. Click below to find out more about this great jack.