Want to make the best buying decision regarding Pittsburgh 61253 3 tons low profile floor jack? This review is just right for you. Skim through all minor details we have mentioned and a verdict accordingly.
Pittsburgh 61253 3 Ton Low Profile Floor Jack Key Features
Whenever buying a floor jack, the weight capacity is the first thing you should look for. The Pittsburgh Automotive floor jack got 3 tons (6,000 lb) of lifting power. That means your car should be under 6,000 pounds to best lift it and eliminate the risks of falls.
In lifting vehicles, the floor jack can raise load 2 times its load capacity. If you have a truck that weighs, say 9000 lb, you can still lift it with the Pittsburgh Automotive floor jack.
Because when it comes to lifting cars like Mustang, trucks, or SUVs, you’re not raising it all at once, nor is there any center jack point in them. You would probably be jacking one wheel at a time, say two. So its weight is not dependent on that one wheel. And that would for sure come in the load capacity of the floor jack.
However, don’t overload a floor jack. By overload, it means way more than its capacity.
Minimum Lift Height
Sports and luxury cars are low to the ground, and there are rare options of a floor jack to slide it under them. Thanks to this floor jack that is extremely low profile, and easily gets beneath cars that are dropped to the ground.
When measured, it tells the jack is almost 3.2″ (8.2 cm) lower. That makes it outstanding because most other jacks out there provide a minimum height of 4+ inches, Torin jacks, for instance.
In most cases, this turns out to be the biggest hindrance while buying a floor jack. However, this jack ticks green in the column and, so far, is a reliable unit.
Maximum Lift Range
The more it is lower to the ground, the higher it goes up when you want it to. This floor jack lifts 19 3/4 inches which turns out almost 20 inches. Compared to the minimum height, the maximum height is to be praised.
This floor jack’s max lift height leaves behind more than enough space for installing a jack stand so you can safely creep under your cars. Speaking of it, your stands should have a lower max-height than the jack’s max-height if you want to fully extend the stand and then place it, which isn’t needed in most cases.
Thankfully, you can change the oil as well as a flat tire of your car with this floor jack. So, if you are a garage owner or prefer handling your car issues yourself, it can be of good help and value to have.
Dual Piston Pump
For sure, you never like to invest a fraction of time for small maintenance. And, in this maintenance, when step one, which is pumping, drains your energy and time, the entire process gets slow. Thanks to the Pittsburgh floor jack, nothing of the sort happens.
The jack is integrated with dual-piston technology. Due to this, you need not invest a lot of effort and time. It reaches a maximum height in almost 6 full pumps which are pretty quick. With it, you do achieve your target height quickly and with minimum effort.
Agreed that it doesn’t lift as quickly as advertised, that is in 3 ½ pumps but still quicker than others with single-piston. So, grab it if you are very concerned about this factor when buying a floor jack.
Mind that the saddle is not removable. It rotates around the centerpiece in 1 1/8 inches. It has a diameter of 4 1/4 inches and holds your car very well from the front and back.
In this feature column, it is still better and wider than its competitor and works amazingly. You can rest assured of safe handling when it is the holder.
After all, you need to be certain that the jack stands are backing your vehicle’s load along with the floor jack. It’s never safe to work under your car or SUV without having a strong backup or security.
If peeked closely, you’ll know that the floor jack weighs 75.1 pounds. Although it’s for the durable material integrated into the manufacturing, the jack is quite heavy to carry. Never mind, because the manufacturer has installed a handle and casters.
The unit doesn’t come all assembled.
You’d find wheels along with the handle in a separate box. These wheels are wider than others available out there and measure 14 3/8 inches in width. The motion of these wheels is not very quick yet acceptable. Each of them is made out of metal and so sturdy to go down the road. When it comes to handling, it is 45 1/4 inches long.
You can twist it to adjust the height of your jack or tug from one point to another. Note here that the handle doesn’t have rubber pads and knurled steel grip, due to which the grip is not as firm as expected.
For easier storage, this handle is also removable. So, if you are short on space, you can surely do that and store the entire unit conveniently.
Price and Warranty
About the price, it’s an average-priced product. There are options in the market that provide you less while they cost more. Comparatively, it is a budget-friendly investment.
Nothing is a drawback with this floor jack but the warranty. With it, you get 90 days of warranty. So, make sure, if you are buying, check it thoroughly in the tenure and ask for maintenance if required. Other than that, it’s an excellent product.
The Pittsburgh 3-ton jack is one of the best low-profile floor jacks. Its unique selling point is the lift range (3.2 – 20 inches) which is rarely found in the floor jacks.
Although it’s a heavily weighted device, it has a handle and wheels to help in maneuverability. So, you can move it with ease along with storage as the handle is removable. On top of that is its dual-piston, due to which it lifts quicker than others.
For us, it’s a win-win floor jack – in terms of functionality, durability, and versatility. Hey, if you haven’t checked its price and ratings online yet, click the button below to find out.