Jacking up a KIA for maintenance or repairs is an essential task for any car owner. However, it is crucial to follow proper safety precautions to avoid accidents and injuries. This guide will provide step-by-step instructions on how to jack up KIA safely and effectively.
By following the steps given, you can jack up KIA Soul, Sportage, Sorento, Seltos, Stinger, Forte, Niro, or any other model as long as the tools that you have meet the respective vehicle requirement.
How to Jack Up KIA Soul, Sportage, Sorento, Seltos, Stinger, Forte, Niro
Before jacking up a KIA, it is important to select a level surface for the task. Ensure that the ground is stable and free of any obstacles that may interfere with the jacking process. Gather all necessary tools and equipment, including a floor jack, jack stands, and wheel chocks.
Check the KIA’s manual for recommended jacking points and weight capacity. Different KIA models may have different jacking points, and it is essential to know these points before starting the jacking process.
1. Jacking Up the KIA
Position the floor jack
Position the floor jack on the KIA’s recommended jacking point, usually indicated by a triangle or notch on the car frame. Be sure to position the jack in the center of the recommended jacking point for added stability.
Every KIA model has a jack point near each wheel. This way you can find four jack points. And raise the tire from their respective jack point. Make sure that the jack you’re using has enough capacity.
The KIA Soul, Sportage, Sorento, Seltos, Stinger, Forte, and Niro weigh under 5000 lb. In order to jack any of the mentioned models, you will need to have a floor jack with 5000 – 6000 lb bearing capacity. This is how you will safely lift KIA models.
Raise the KIA
Use the jack handle to pump the floor jack and raise the KIA. Raise the car to the desired height for the maintenance or repair task. It is crucial to avoid sudden movements and lift the car gradually to ensure stability.
Since you would have decided how high you want to raise your KIA, ensure that the floor jack can also be extended to that height. You can find this from the jack’s maximum lift range.
Support the KIA with jack stands
Once the KIA has been raised to the desired height, it is essential to secure it in place with jack stands. Place the jack stands under the recommended jacking points, ensuring they are positioned correctly and level.
As said above that the floor jack must meet the KIA model capacity, the same is true for the jack stands as well. They should have enough capacity to support the load. Their lift range should fall under the jack’s capacity.
Lower the KIA onto the jack stands
Carefully lower the KIA onto the jack stands. Ensure that the car is securely positioned on the stands before releasing the floor jack. The stand should be locked at the desired height using the lock system. After that, the load can rest on them.
2. Completing the Job
Secure the KIA with wheel chocks
Secure the KIA in place with wheel chocks to prevent it from rolling during the maintenance or repair task. Chock the wheels that will stay on the ground. If you want to raise the front two tires, block the rear tires with the chocks so the car does not move while being raised.
Complete the maintenance or repair task
Complete the necessary maintenance or repair tasks on the KIA.
Raise the KIA off the jack stands
Once you’re done with your repair or tire change, now is the time to remove the stand. Raise the KIA off the jack stands using the floor jack. Raise the car gradually, and ensure it is stable before removing the jack stands.
Remove the jack stands
Remove the jack stands carefully and slowly, ensuring the KIA is stable before lowering it back to the ground. At the time of removing the stands, the car should be resting on the floor jack, not on the stand.
Lower the KIA to the ground
When the jack stands have been removed, rotate the floor jack’s handle counterclockwise. The jack will come down and so does the car. Lower the KIA to the ground carefully, avoiding any sudden movements.
You May Also Like: How to Jack up INFINITI Q50, QX60, G37, and Q60
3. Additional Tips and Precautions
When jacking up a KIA, it is essential to take extra precautions to ensure safety. Larger KIA models may require a heavier-duty floor jack and jack stands, so be sure to check the weight capacity before starting the jacking process.
It is also important to avoid overloading the jack or using makeshift jacking points, as this can cause damage to the car and increase the risk of accidents. Regular maintenance and inspections of the KIA’s jacking points and equipment can also help to prevent accidents.
Conclusion:
This is how to jack up KIA. Raising up a KIA for maintenance or repair tasks can be an easy and effective process when done correctly. Following the steps outlined in this guide and taking necessary safety precautions can help to ensure that the task is completed safely and efficiently. Be sure to always refer to the KIA’s manual for recommended jacking points and weight capacity to prevent damage to the car and increase safety.
Related: How to Jack up Lexus IS 250 CT 200h ES 350 LS 460 LS 430