How will your Porsche 996 look with dents right on the front? Drastic, no? Assuming that we have come up with the 3 best floor jacks for Porsche 996 and 911 GT3. These sports cars need their specific jacks for lifting, and regular jacks can damage their looks.
The ground clearance of a Porsche is around 4.33 inches (109 mm), and very few jacks have this minimum height to get under it. So, our team searched for jacks while keeping the car’s weight in mind.
Guess what? The best options are listed below. Let’s get into them so that you never have to see your sports car looking ill.
|2 ton (4,000 lb)||2 ton (4,000 lb)||3 ton (6,000 lb)|
|2.75" (7 cm)||2.75" (7 cm)||3" (7.62 cm)|
|15.5" (39.4 cm)||24" (61 cm)||19.5" (49.5 cm)|
|Weight||58.7 lb (26.6 kg)||97 lb (44 kg)||77 lb (34.9 kg)|
|Jack + Jack stand||Long reach||Pedal pump|
|Size||24.7 x 13.4 x 7.75||32.5 x 8.25 x 11.2||31 x 16 x 6.5|
Best Floor Jack For Porsche 996, 911 GT3 - Arcan A20016/XL2T
Are you searching for a low-profile floor jack? You can’t go wrong buying the Arcan A20016/XL2T floor jack. It has a very slim design that can reach under the Porsche 996 and 911 up to about 32 inches, which is quite long.
Bear in mind that out of the 32 inches, only 18 inches of the chassis has a height of 2.75 inches, which increases afterward. This 7 cm minimum height with an 18-inch throw still helps you reach far jack points under your Porsche.
Although the jack weighs 97 pounds, which is higher than the other two jacks, it’s durable and sturdy. The steel that constitutes its heavyweight is also behind the long life of the unit.
Consider here that the jack consists of steel casters and a sturdy handle that you can move with ease. The removability of this handle for easy storage also makes it a convenient unit.
With a wide 3 13/16-inch diameter of the saddle and release valve, it becomes a secure jack. It is one of the perfect jacks for the Porsche 996 and 911, as both weigh around 3,000 pounds, while the jack can lift up to 4,000 pounds or 2 tons.
Because it has a 2.75-inch minimum height, it can get under the front as well as the backside of the two models of Porsche. Also, it lifts the vehicle 24 inches high above the ground. That means not only tire changes but also regular maintenance can be easily done with it.
Compared to the other two floor jacks here, it gets the job done pretty easily. It is backed by a one-year warranty, so you can use it worry-free.
There’s no reason you shouldn’t get it. So hit the button below and check out the price and explore more about it.
Best Floor Jack For Porsche 996, 911 GT3 - [Video] Arcan A20016/XL2T
Powerbuilt 620479 E Top Floor Jack & Stand For Porsche
- All-in-one floor jack with locking mechanism for safe operation without a stand
- Low profile design and minimum height suitable for Porsche 996 and 911 GT3
- Wider saddle for added safety
- Can lift vehicle up to 15.5 inches for easy tire changes and repairs
The trend of buying a floor jack and jack stand together is common, but this floor jack includes a locking mechanism for safe operation without a stand. This is an all-in-one floor jack. Just raise the jack and lock it at the desired height. No need to buy separate jack stands when you have this Powerbuit car jack.
The product It’s also great for Porsche 996 and 911 GT3, with a low profile design and a minimum height of 2.75 inches, allowing it to reach far under the car.
Compared to the Arcan A20016 and CAT 240109, the Powerbuilt 620478E has a wider saddle, making it even safer to use. It can lift your Porsche to 15.5 inches, making tire changes and repairs easy. Transporting the jack is also easy thanks to its handlebar and swiveling casters. With a 2-ton capacity, it can work for cars, trucks, and SUVs in addition to Porsche.
Finding a great deal like this can be challenging, so don’t hesitate to check out the reviews and prices by clicking the button.
CAT 240109 Porsche Floor Jack with Pedal Pump
- Low minimum height of 3 inches makes it easy to slide under a Porsche or other vehicles
- 3-ton lifting capacity makes it versatile for use with other cars
- High-quality floor jack with a one-year manufacturer’s warranty
In terms of price, the floor jack may seem a bit expensive, but the quality justifies the cost. It’s one of the best jacks for Porsche, with a one-year manufacturer’s warranty.
The 3-inch minimum height of the jack allows it to fit easily under a Porsche, while the maximum height of 19 inches makes it suitable for various maintenance tasks. With a 3-ton lifting capacity, it can lift heavier weights than the other jacks listed, making it versatile for use on other cars. The dimensions of 31 x 16 x 6.5 inches provide stability.
The dual-piston and pedal pump mechanisms make it secure and easy to use, allowing you to raise the car while standing. The handle can also be used as a pumping lever, and the jack pumps quickly and lifts high with just a few pumps.
While the jack may be challenging to use at first, it comes pre-assembled, and you only need to install the handle and saddle before using it.
Overall, this floor jack is excellent and worth checking out. Click the button below to view the price and purchase before it’s out of stock.
Purchasing Guide for Porsche Car Jack
Here is a complete buying guide to help you make an informed decision.
When looking for a floor jack for your Porsche, the minimum height is an essential factor to consider. Since Porsche are low to the ground, a low profile design with a minimum height is preferable, as it allows the jack to fit under your car and lift it from a lower position.
Ensure that the jack’s collapsed height is less than the ride height of the Porsche. Only in this case, the tool will get under the car and access the jack point. If it is the other way around, you won’t be able to install it underneath the car.
Rapid Rise Pump
Next, the quick rise mechanism allows the jack to lift the car quickly, making it easier to perform maintenance and tire changes. The faster the pump, the easier it will be to use the jack.
The lifting capacity is another critical factor to consider when purchasing a floor jack for your Porsche. A lifting capacity of at least 2 tons is recommended for most Porsche models. However, for heavier models, such as the Cayenne or Macan, a higher lifting capacity may be necessary.
The saddle diameter is the surface that comes in contact with your car’s lifting points. It’s important to choose a floor jack with a saddle diameter that matches your Porsche’s lifting points. A wider saddle diameter is better, as it distributes the weight evenly, reducing the risk of damage to your car.
Aluminum and steel are the two most commonly used materials in floor jack construction. Steel jacks are more durable and long-lasting, but they are also heavier. Aluminum jacks, on the other hand, are lightweight but may not be as cheap.
When choosing a floor jack for your Porsche, you should consider the minimum height, rapid rise pump, lifting capacity, saddle diameter, and material. By taking these factors into account, you can ensure that you purchase a floor jack that is safe, durable, and suitable for your Porsche.
The floor jack in this article meets all the needs of your Porsche.
All of these are the best floor jacks for Porsche 996 and 911 GT3, but our first choice is always the Arcan A20016/XL2T. That’s because the unit can lift the car up to 24 inches, making it easier to perform maintenance jobs and tire changes.
In addition to being backed by a one-year warranty, it has a wide saddle and can reach up to 32 inches under the car, which is why it is sold in bulk in the market. Portability is also a standout feature thanks to the steel casters and handle.
Click the yellow button below to further explore this low-profile floor jack.