The 4 Best Floor Jacks for Tesla Model S, X, Y & 3

best floor jack for Tesla
Photo by : Flickr

Browsing for the best floor jack for your Tesla Model 3, Model Y, Model X, or Model S? If so, you’ve come to the right place. This article unboxes the floor jacks for all Tesla Models.

After thorough research and consideration of Tesla’s specifications, we have showcased the best options here.

Let’s first go through an overview of the products.

An Overview of the Tesla Floor Jacks

ARCAN A20018 floor jack for Model X

  • 3-ton load capacity
  • 3.75 – 18″ lift range
  • 58 lb item weight
  • Dual-piston Pump

Powerbuilt 620479E for Model 3

  • 2-ton load capacity
  • 2.75 – 15.5″ lift range
  • 58.7 lb item weight
  • Single-piston Pump
  • Jack + Jack Stand

Jack Boss AS830011L for Model S

  • 3-ton load capacity
  • 3.9 – 18.3″ lift range
  • 58.5 lb item weight
  • Dual-piston Pump

Torin T83505W Jack for Model Y

  • 3-ton load capacity
  • 3.7 – 18″ lift range
  • 75.8 lb item weight
  • Single-piston Pump

Basenor ‎CA045-4 Jack Pads for

  • Tesla Model S
  • Tesla Model 3
  • Tesla Model X
  • Tesla Model Y

ARCAN A20018 Best Floor Jack for Tesla Model X

  • Capable of lifting a 6,000 lb load, including Tesla Model X
  • It quickly goes under Model X ground clearance.
  • Wider saddle top, maximum contact with the jack point. 
  • Fast hoisting by two parallel pumps
  • The lightest floor jack on the list due to the Aluminum body.
  • Features handle on both sides, which is handy while positioning it.
  • Product Dimensions: 6.12 x 23.9 x 12.2
  • Product Weight: 58 lb (26.3 kg)
  • Product Color: White & Green
  • Minimum lifting point height: 3.75 inch
  • Extended height: 18 inch
  • The size is big, occupying more space.
  • Pricey, yet worth it.

If you are in search of a floor jack that offers ultimate portability for your Tesla X then you have come to the right place. The Arcan floor jack is a hybrid construction made of aluminum, weighing only 58 pounds, which is lightweight compared to other floor jacks on the market.

With a load capacity of 6,000 pounds, this floor jack can easily lift the approximately 5,390-pound Tesla Model X, as well as other Tesla models within the load range.

Not only does the jack excel in the weight column, but it also fits under the Model X, thanks to its minimum height of 3.75 inches and maximum height of 18 inches. This makes it easy to install the jack under the 8-inch ground clearance of your Model X when you need to change a flat tire or perform other maintenance.

The solid, swiveling wheels of the floor jack also aid in maneuverability, allowing you to move it quickly within your garage. Moreover, the jack is integrated with two side handles that enable you to position it under a jack point or carry it from one place to another.

The jack is featured with a dual-piston pump that lifts your car quickly, saving you time and energy, as only minimum strokes are required. Furthermore, the padding on the lower part of the handle prevents scratches and damage to your Tesla.

It’s worth noting that you will also need jack pads for your Tesla model when using the floor jack, as they protect your car’s chassis and battery. Before exploring the pads, why don’t you check out the price and ratings of the jack on Amazon by clicking the button below?

Powerbuilt 620479E Best Floor Jack for Tesla Model 3

  • It can raise a 4,000 lb load, fit for Model 3
  • Square saddle with rubber treads for maximum grip.
  • All-in-one feature, jack and jack stand – saving you more bucks.
  • Lower jack point height than the above jack, hence quick sliding under the car.
  • Meets ASME standard for safety.
  • Product Dimension: 13.4 x 24.7 x 7.75
  • Product Weight: 58.7 lb (26.6 kg)
  • Product Color: Silver
  • Minimum height: 2.75 inch
  • Maximum height: 15.5 inch
  • It does not have as fast lifting as with the above jack because of the single-piston pump.
  • Features only one handle for positioning.

The Powerbuilt floor jack is the best option for maintaining the safety of your Tesla Model 3. It features holes integrated into the lift arm of the jack and comes with a steel bar. When lifting, you only need to slide the bar between the holes to lock it into position.

Note that this safety system has two locking positions, and you won’t need to buy jack stands with this unit, which most Tesla models don’t provide room for.

The Powerbuilt jack can hold 2 tons of weight, which translates to 4,000 pounds. It can easily lift both the Tesla Model 3 with a single and dual motor, which weighs 3,648 and 4,250 pounds, respectively.

In addition, this floor jack is compatible with getting under the car. The unit has a minimum height of 2 3/4 inches, while the Model 3 has a clearance of 5.5 inches. However, the maximum height of the jack is not that high; it is 15 1/2 inches.

Like the Arcan jack mentioned earlier, it also has a handlebar for transporting the jack, which is located on the back of the jack, not on the sides. Despite using steel alone in this floor jack, it weighs the same as the Arcan, at 58.7 pounds.

For mobility, it has two swivel casters on the back and two fixed front wheels. It also features a 4-foot-long handle that you can use to drag the unit. So, check out the price on Amazon to compare it with the other models mentioned here.

Powerbuilt 620479E Best Floor Jack for Tesla

Jack Boss 3 Ton Low Profile Floor Jack for Tesla Model S

  • Highest load capacity jack – 6000 lb – fit for Model S and more.
  • Super quick lifting by its two pumps operating at the same time.
  • The heavy-duty aluminum structure lasts for decades.
  • Product Dimensions: 11.5 x 25 x 6.5 inches
  • Product weight: 58.5
  • Product Color: Red & Silver
  • Minimum Lift Height: 3.9 inch
  • Maximum Height: 18.3 inch
  • The jack is heavy and weighs around 58.5 lb
  •  Expensive item

The next item on the list is the Jack Boss AS830011L floor jack. It has the highest load capacity among the floor jacks in this article. With this jack, you can lift up to 6,000 lbs. You can raise any Tesla model using this hydraulic system, including the Tesla Model S, which weighs less than 6,000 lbs.

As Tesla vehicles are low to the ground, they require a jack with minimal lifting height to make it easy to install under the car. Fortunately, the Cat brand has got you covered. This floor jack features a 10 cm (3.9″) minimum height, perfect for low-profile cars.

To keep your Tesla free from dents, the jack handle’s lower part is wrapped with foam in case it touches the body while pumping. The handle is long enough to grab and roll over the garage, but picking it up requires a bit of effort due to the jack’s weight.

Like the Arcan floor jack on the list, this one also features a dual-piston pump for rapid rising, but that makes it pricey. You can check its cost, reviews, and ratings through the button below, which takes you to Amazon.

Torin T83505W Floor Jack for Tesla Y

  • 6000 lb lifting power is more than the Tesla Model Y weight.
  • Wide circular saddle for jacking the car.
  • The pumping handle’s lower part is wrapped with foam, protecting your car.
  • Swivel wheels allow you to maneuver the jack 360 degrees.
  • Product Dimension: ‎25.2 x 13.5 x 6.9 inches
  • Product Weight: ‎75.8 lb (34.4 kg)
  • Product Color: Black & White
  • Minimum Lift Height: 3.7 inches
  • Extended Height: 18 inches
  • It features only one piston pump; hence needs more strokes for max lifting.

This 3-ton Torin jack is perfect for multiple Tesla models, including the Model Y, as each weighs under 6,000 pounds, and this floor jack can hold them well.

Made out of steel, it is one of the heaviest floor jacks on the list, weighing 75.8 pounds. Although it is equipped with four wheels with fixed front and swiveling rear wheels, the unit is still heavy to move around.

It is also the least available option due to the single-piston pump. Unlike the other two floor jacks above, it demands more pumps to attain maximum height. So if you have no issue with that, you can surely go for it.

The lowest height of the Torin is 3 7/10 inches, through which it is apparent that it can go under all Tesla models, including the Model Y, which has 6.3 inches of ground clearance.

The maximum height of this floor jack is 18 7/10 inches, which lifts your car high enough to perform regular maintenance. Thanks to the 3.4 inches-wide saddle, the operation is smooth.

Although this unit has a few drawbacks, it provides a lot at a lower cost than the floor jacks above. Compare its price on Amazon with others by clicking the button below.

Best Jack Pad Pucks/Adapters for Tesla Model 3, Y, S, and X

The BASENOR pads are the best jack pad adapters for all Tesla models. The package includes four pads, one for each of the four jack points on the Tesla, as well as a storage box to keep them safe. While jack pads may not be necessary for other vehicles, they are crucial for protecting the chassis and batteries of Tesla models. You can learn more about these jack pads on Amazon by clicking the button below.

FAQs

Can you use a floor jack on a Tesla?

You can use a floor jack on a Tesla, but it requires special pucks to be installed on the jack point beforehand. This is because Tesla models have batteries located at their chassis, making the process of lifting them with a floor jack different from other cars.

What jack does Tesla use?

You can use any floor jack as long as it has enough load capacity for lifting Tesla and has a minimum height lower than Tesla’s ground clearance. As mentioned above, ARCAN HJ3000A, Powerbuilt 620479E, and Cat 240332 are floor jacks with features specific to Tesla models. 

What size jack do you need for Tesla Model 3?

A 2-ton floor jack is the appropriate size for lifting a Tesla Model 3, which weighs around 4,000 pounds according to Google. The Powerbuilt 620479E floor jack is a good option that meets the needs of the Tesla Model 3. You can read more about it in the review section above.

Do you need pucks to lift Tesla?

Of course, you need pucks to lift a Tesla. As you know, Tesla models have batteries on their chassis, and when you’re lifting them, you’re probably using the chassis. So, to protect the lower part of the models, you need jack pads for secure lifting. Floor jack pucks prevent damage to the jack points and batteries.

Conclusion

While Tesla cars are not particularly low to the ground, it’s still important to choose the best floor jack for them to ensure that the car remains undamaged and to achieve a perfect fit. These are the best options available on the market.

Among all of them, our hands-down choice is the ARCAN A20018 It is a hybrid model with dual-piston, an average weight, a large handle, and swiveling wheels for smooth maneuverability.

It can lift all Tesla models as they fall within the load capacity of the floor jack. With a minimum lift height of 3.75 inches, it has an excellent maximum height of 18 inches.

If you haven’t checked out this model yet, click the button below to explore it further on Amazon.

Leave a Reply

Your email address will not be published. Required fields are marked *