The 3 Best floor jacks for Mustang [Feature Dual-piston Pump]

If you’re in search of the ultimate floor jack for your Mustang, look no further. This article brings together a selection of top-tier jacks that not only provide excellent support for your Mustang’s weight but also effortlessly slide under the car’s low clearance.

Let’s take a look at an overview of the products.

Arcan A20002/ XL3000A

  • 6000 lb load capacity
  • 3 – 19.72″ lift range
  • 78.6 lb item weight
  • Dual piston pump

Pittsburgh Automotive 61253

  • 6000 lb load capacity
  • 3.2 – 20″ lift range
  • 75 lb item weight
  • Dual piston pump

Pro-Lift F-767

  • 4000 lb load capacity
  • 3.5 – 14″ lift range
  • 30 lb item weight
  • Single piston pump
Product Arcan
3 ton (6,000 lb) 3 ton (6,000 lb) 2 ton (4,000 lb)
Min. lift
3" (7.6 cm) 3.2" (8.2 cm) 3.5" (9 cm)
19.72" (50 cm) 20" (50.8 cm) 14" (38 cm)
Pump Dual Piston Dual Piston Single piston
Weight 78.6 lb (35.6 kg) 75 lb (34 kg) 30 lb (13.6 kg)
Size 29 x 13.8 x 6.3 28 x 12 x 10 18 x 8.5 x 5.3

Best Floor Jack for Mustang - the Arcan A20002/XL3000A

Mustangs are renowned for their prestigious status as sports cars. As is the case with most sports vehicles, Mustangs tend to have a low ground clearance. With an average ground clearance of 5.3 inches, it’s essential to have a floor jack that can easily slide beneath this low ride height.

Fortunately, the Arcan A2002/XL3000A floor jack boasts one of the lowest lifting ranges available. It can effortlessly lift cars with ground clearances ranging from 3 inches all the way up to 19.72 inches, making it an ideal choice for Mustang owners.

Since your Mustang weighs around 3000 lbs (1.5 tons), this 3-ton Arcan jack is perfectly suited for your needs. Designed specifically for lifting Mustangs, its lifting power far exceeds the weight of the car. Thanks to its double piston pump, you can achieve significant height with just a few pumps, saving you time and effort.

With a maximum lift height of 19.71 inches, it provides ample room underneath your sports car. Additionally, the quick-lift feature enables the saddle to be raised to the load much faster. The wide saddle is specifically designed to accommodate the needs of a Mustang.

Despite being a metal floor jack and slightly heavier than its aluminum counterpart, it remains highly maneuverable due to its high front wheels and mounted rear casters. Furthermore, the High Carbon sides ensure exceptional chassis strength.


  • Double piston.
  • 3 ton ideal for Mustang.
  • Quick-lift.
  • Wide saddle.
  • Ideal lifting range for Mustang.


  • Heavy

Pittsburgh Automotive 61253 Top Car Jack for Mustang

A noteworthy option in the ultra-low-profile category is the Pittsburgh Automotive 3-ton floor jack. Its heavy-duty steel construction, meticulously welded for durability, adds weight but ensures a sturdy and reliable floor jack.

The Pittsburgh floor jack boasts a minimum lift height of 8.2 cm (3.2 inches), making it an excellent choice for accessing the undercarriage of sports cars. Its steel design incorporates a rapid-rising lift mechanism, capable of hoisting a 6,000-pound load. This capacity aligns perfectly with the weight range of Mustangs, as an average Mustang weighs around 3000 lbs.

Moreover, the two parallel pumps significantly reduce the effort required to elevate your sports car, making the process five times faster. The two rear 360-degree swivel casters glide effortlessly across driveways, ensuring smooth maneuverability. The saddle of this floor jack is also constructed from steel, further enhancing its durability.

The device is equipped with “Rapid Pump Technology,” enabling you to reach the maximum lifting height in just three and a half pumps of the extra-long lever. The lever features a two-section design, with the bottom part foam cushioned to prevent any damage to your Mustang during the pumping process.

The Pittsburgh Automotive 3-ton floor jack offers a generous lifting range, spanning from 3 1/8 inches to 19.75 inches. This versatility makes it suitable for raising a wide range of vehicles with low to medium ground clearance, including Mustangs.


  • Steel saddle.
  • Dual Piston pumps.
  • Affordable.
  • Ideal lifting capacity.
  • Ideal lifting range.


  • Not ideal for harsh conditions.

[Video] Pittsburgh Best Floor Jack for Mustang

Pro-Lift F-767 Low Profile Mustang Car Jack

The Pro-Lift F-767 takes its place on our list as one of the best floor jacks for Mustangs. Crafted from solid, high-quality steel, this floor jack ensures maximum durability. Despite its robust construction, it surprisingly weighs just above 30 pounds, making it relatively lightweight.

With a lifting range of 3.5″ to 14″, the Pro-Lift F-767 is perfectly suited for Mustangs with low ground clearance. Unless your vehicle sits exceptionally low, this lifting height will prove sufficient, reaching a maximum elevation of 14 inches.

The hydraulic system of the Pro-Lift F-767 incorporates various safety features, including a built-in safety valve to prevent overloading and a safety release valve to prioritize operator safety. Like other top-tier floor jacks on the market, the Pro-Lift is designed to provide longevity. Its reinforced steel construction allows it to lift loads of up to 2 tons.

Thanks to its durable construction, this floor jack will remain a reliable tool in your garage for a long time. Its grey finish paint not only protects it from corrosion but also contributes to its overall longevity.

One minor drawback of the Pro-Lift F-767 is that it lacks dual-pump functionality, resulting in slower lifting compared to dual pump models. However, it still performs the job it’s designed for effectively.

The robust steel saddle of the Pro-Lift F-767 matches the strength of the floor jack itself and can rotate to accommodate movement during the lifting process. One issue with this type of saddle is that it may occasionally cause dings to the jack points underneath the car.

With a lifting capacity of up to 4000 lbs, the Pro-Lift F-767 can handle cars weighing far more than the average Mustang, which weighs around 3000 lbs. Having a floor jack with a capacity exceeding the weight of your car is always beneficial.

It’s no surprise that the Pro-Lift F-767 shines among the best floor jacks for Mustangs. To explore the product’s ratings and price, simply click the yellow button below.


  • Durable.
  • Robust.
  • Ideal Lifting Range.
  • Ideal Capacity.
  • Safety measures included.
  • Steel Saddle.


  • Not Dual pump.

Final Thoughts

If you’ve been browsing the internet in search of the ideal floor jack for your Mustang, this article has surely eased your burden. All three of our top picks are outstanding choices that perfectly match the clearance and weight requirements of your Mustang. So don’t hesitate any longer and order yours without delay!

If you want to discover the best floor jack on the list for your Mustang, click the button below to check the product’s ratings. It boasts an impressive 6,000 lb load capacity.

Leave a Reply

Your email address will not be published. Required fields are marked *