Best Floor Jack for Dodge Ram 1500 & Durango

Best floor jack for dodge ram 1500 and durango

This blog will explore the best floor jacks for Dodge Ram 1500 and Dodge Durango. If you’re looking for it, you’ve reached the right place.

Let’s have a quick overview of the products.

An Overview of the Dodge Floor Jacks

Blackhawk B6350 for Dodge Ram 1500

  • 7000 lb load capacity
  • 5.5 – 22″ lift range
  • 85 lb item weight
  • Single piston pump

Arcan ALJ3T for Dodge Durango

  • 6000 lb load capacity
  • 3.75 – 18″ lift range
  • 58 lb item weight
  • Dual piston pump

Daytona 64780 for Dodge

  • 6000 lb load capacity
  • 3.25 – 20″ lift range
  • Alloy steel body
  • Dual piston pump

Best Floor Jack for Dodge Ram 1500 - The Blackhawk B6350

The Ram 1500 has around 5,000 lb curb weight. For lifting such a load, you need a floor jack that can raise more mass than 5,000 lb. The Blackhawk B6350 model got your back. Because it features a 7000 lb (3.5 ton) load capacity, which can lift your pickup for changing a flat tire, tire rotation, or carrying out any repair or maintenance. 

Lifting the Ram 1500 with the jack won’t be that quick due to the single piston pump of the jack which needs a few more pumps compared to a dual piston jack.

Best Floor Jack for Dodge Ram 1500
Click the image to see its price on Amazon

You can easily install this car jack under the Dodge truck because of its low minimum height – 5.5 inches (14 cm). The Ram 1500 has 8.4 – 11.8 inches of ground clearance, which allows more space for placing the jack under any jack point.

Speaking of the height, you can extend the product to 22 inches. This means if you put it under the jack point and pump it to its max height, you will gain more than space beneath the truck for placing a jack stand and safely creeping under the vehicle. 

The product is the Bestseller on Amazon and has won over 4,000 positive ratings. You can explore its price, ratings, and more by going to the Amazon page through the image above. Tap to find it out. 

Top Floor Jack for Dodge Durango - The Arcan ALJ3T

This car jack fits your Durango. It has a 3-ton (6000 lb) load capacity that can lift the 4750 lb Dodge Durango. The Arcan ALJ3T jack features lower lifting power than the former jack. This means that the Blackhawk jack can also be used for Durango.

The minimum height of the jack is 3.75 inches, smaller than the B6350 jack which allows you to slide it under your vehicle easily. On the other hand, the item’s max height is almost one and a half feet. It lets you add almost 10 inches more clearance to your Durango since it has 8.1 inches ride height. 

Top Floor Jack for Dodge Durango
Click the image to see its price on Amazon

You can smoothly perform any task under the truck with such space available. With that, make sure that your jack stand’s height is lower than the max height of the jack. And never get under the truck relying on the hydraulic jack only. You should put some stands to hold the load. 

This Durango floor jack has two features that are not with the Blackhawk jack for Ram 1500. It comes with dual-piston pumps that lift vehicles more quickly than the former jack. It needs fewer strokes to fully extend, thus saving your time and energy. 

Moreover, it is lighter and just weighs 58 lb. That’s because of the aluminum body it has. You will be able to easily position it under the jack point by the side handles. They are also handy in carrying it from one place to another. 

You can further explore this Arcan ALJ3T Car jack on Amazon by clicking the image. 

Daytona 64780 Car Jack for Both Dodge Models

Meet the last product on the list – the Daytona floor jack compatible with Dodge Ram 1500 and Dodge Durango. Both the models have a weight of less than 6000 lb. And the jack features the same load capacity, 6000 lb. This gives you the choice to pick the jack for either dodge model if you haven’t chosen from the list above. 

It’s a heavy-duty floor jack with a low profile, which means that it requires low clearance to fit under. The 3.25 inches is the collapsed height of the jack while the max height lies in the middle of the two jacks and that is 20 inches.

floor jack
Click the image to see its price on Amazon

This is more than enough space under your truck, and you won’t even need this much clearance for changing a tire. Only a few-inch lifting is sufficient for replacing the flat tire. The product is made of alloy steel, making it a bit heavier than the Arcan aluminum jack. 

To save your car from any dents, the lower part of the pumping handle is padded with rubber. And it can be detached into two parts for compact storage. This jack has gathered fewer ratings on Amazon than the two jacks. However, if you want to check its price, you can do so by the photo.

Can a 2-ton Jack Lift a Dodge Ram 1500?

No, a 2-ton jack cannot lift a Dodge Ram 1500. It can only raise 4000 lb, which is its maximum safe load capacity. The Dodge Ram 1500 weighs more than that. The Dodge Ram 1500 is a powerful truck that can weigh up to 5000 lb. A 2-ton jack, which can lift a maximum of 4000 lb, can still be used to raise one wheel of the Dodge Ram 1500. 

Since the other three wheels remain on the ground and support the load, the weight on the jack alone does not exceed the jack’s lifting capacity. Therefore, as long as the weight of the Dodge Ram 1500 is under 5000 lb, a 2-ton jack can lift it without any issues.

Will a 3-ton jack lift a Ram 1500?

Yes, a 3-ton jack will lift a Ram 1500. The jack can raise 6000 lb. It is the maximum safe load capacity of the 3-ton floor jack. This means the truck comes under its capacity, and you can easily lift the Ram 1500 with it. 

How Big of a Jack Do You Need For a Ram 1500?

You need a 3 – 3.5 tons big jack for a Ram 1500. Such floor jacks are worth lifting 6000 – 7000 lb respectively. The Ram 1500 almost weighs 5000 lb, which is lower than the 3-ton jack. It is a good decision to pick a high load capacity jack for maximum safety.

The floor jacks that we have reviewed in this article fit the needs of the Dodge Ram 1500. Its lift range, load capacity, and pump are well enough for lifting such trucks. If you want to read more about them, check out the review section above. 

How Do You Remove the Jack from a Dodge Ram 1500?

Removing a jack from the Dodge Ram 1500 is simple. When you’re done with the task, or repair or change a tire, rotate the handle of the jack, and it will come down and so will the vehicle. Then remove the jack. 

Bottom Line

There are many floor jacks in the market and some of them will fit Dodge trucks. We’ve chosen the best ones that meet the Dodge Ram 1500 and Durango needs. They have more lifting capacity than the trucks’ load and can easily fit under them due to their low minimum height.

Click the button below to explore the Blackhawk floor jack for Dodge Ram 1500 on Amazon. 

Leave a Reply

Your email address will not be published. Required fields are marked *