Browsing for the best floor jack for your Chevy Silverado? Well, search no more. Because you’ve reached the right corner.
The following floor jacks will easily lift your 6,000+ lb Chevy Silverado with just a few strokes by their two parallel pumps. Their original heights are fit for placing them under your Silverado’s ground clearance.
In short, if you want a floor jack for your Silverado that meets your budget, stick around.
First, let’s walk through the comparison table of the products.
A Quick Overview of the Silverado Floor Jacks
Best Floor Jack for Chevy Silverado 1500 - TCE TCE83508
- Load Capacity: 3.25 ton
- Minimum Lift Height: 3.9 inches
- Extended Height: 21 inches
- Pump: Dual piston
- Material: Alloy steel
- Weight: 97.5 lb
- Color: Blue & Silver
- Size: 7.52 x 15.51 x 32.01 inches
- Brand: TCE
- Part No. TCE83508
The TCE model can easily jack your ~6,000 lb Chevy Silverado. Because this floor jack has a 6,500 lb lifting capacity. So your truck falls under the load capacity of the jack. For secure jacking, it’s recommended to choose an item that has more raising power than your vehicle’s load.
As your truck has around 11” ground clearance, you can fit this floor jack under any jack point in your truck. Thanks to the jack’s 3.9” height, which is not tall like bottle jacks. This product will double your Silverado’s clearance if you pump the jack to its full height. The floor jack has a 21” max lift reach, leaving the sufficient area under the truck for the repair. This is why you’ll get double the ride height area under your Silverado.
This product marks a dual-piston pump, not single parallel pumps. With two pump, the jack will lift your Silverado quickly compared to the single piston pumps. It does the job and most people prefer this. Because the double piston floor jacks cost more and are heavier. And if you want to check this product’s availability on Amazon, hit the image.
Performance Tool W1645 Silverado 2500 HD Floor Jack Review
- Long chassis reaches any jack point under the Silverado.
- The rapid lifting mechanism saves your time and energy
- Reaches almost 20 inches, leaving behind enough room for stand installation.
- Made with a safety system that prevents it from over lifting and fights against overpumping.
- Load Capacity: 3.5 ton
- Minimum Lift Height: 3.5 inches
- Extended Height: 20.5 inches
- Pump: Dual piston
- Material: Metal
- Weight: 90.6 lb
- Color: Yellow & Black
- Size: 29 x 15 x 19 inches
- Brand: Performance Tool
- Part No. W1645
So here is the dual piston pump. The Performance Tool floor jack lifts your truck 5 times faster than the above item. This is because the two pistons are doing their job here, pumping. Hence, rapid jacking.
The jack also features a 28” long throw that helps easily reach any jack point under your vehicle. Since floor jacks are stable compared to the other hydraulic jacks—because floor jacks are low to the ground which gives them stability, this Performance Tool jack is even more stable. It’s 15” wide and 28” long, making large base support to your Silverado.
As this jack can lift more weight than your truck’s load, let’s see how much area you’ll get if you pump it to its max height. This floor jack has a 20.5” max lift height, giving a lot of space under your truck for repair work. You won’t need that much area if you want to change the flat tire of your Chevy Silverado. Because raising your vehicle a few inches is enough for a flat tire.
The long handle that comes with this model eases the mobility of the jack around the garage. Because the item is heavy near 100 lb and it’s hard to pick it up with your hands. No need of raising it with your hands when it has wheels. You can move around this jack with the two swivels and two steel casters it has.
Since this jack has two pumps, it’s also heavy on the budget. But it’s worth the money and delivers great performance when it comes to lifting heavy trucks like Silverado. You can check more about this model by clicking on the button.
Video of the Performance Tool Floor Jack
BIG RED T83006 Top Floor Jack for Chevy Silverado
- It has gathered more than 2,814 positive ratings online.
- Trolley jack with two different height saddles for lifted and low vehicles.
- Steel casters that roll over the garage.
- Lightweight and sturdy jack.
This is the cheapest floor jack on the list yet has enough strength to jack your heavy Silverado up off the ground. You’ve heard right. The BIG RED jack has a 6,000 lb (3 ton) load capacity, sufficient to lift a Silverado.
For high-ground clearance vehicles like yours, this floor jack has a long neck saddle, which gives a 9.25” min lift height to the model. This saddle easily touches the jack point with a few strokes. Though you can replace this saddle with a small one which is 5.9” long, there is no need for that in this case.
If you keep the long neck handle in its place and then raise your truck, this floor jack will leave behind an almost 21” area under your vehicle. It’s more than sufficient space beneath Silverado for performing any mechanic work. And for changing a tire, you won’t need that much space.
The jack has a carrying handle and it is not heavy like the above floor jacks. The BIG RED floor jack just weighs 36 pounds. Likewise, other floor jacks also feature two steel and two swivel casters, which help with mobility.
The drawback of this model is the handle. It’s smaller than the 4 feet long handle of the above product. And the jack’s saddle is also not as wide as the above floor jacks. Nor the jack has a dual piston pump. That’s why this item is lighter and cheaper. You can check its price and ratings on Amazon. So tap button to see its price and ratings.
[Video] BIG RED Best Floor Jack for Chevy Silverado
What size jack do I need for a Chevy Silverado?
Multiple variations are there in the Chevy Silverado. Its three popular models are 1500, 2500, and 3500. Each of these has a difference in weight and performance.
The Chevy Silverado 1500 weighs 4,603 pounds. This weight differs from the new edition of the same vehicle. Just like that, the weight of the Chevy Silverado 2500 and 3500 is 6,105 and 7,239 pounds.
Having said that, it’s better to have a 3-ton jack for a Chevy Silverado 1500. While considering a 3.5 and 4 tons jack for the Chevy Silverado 2500 and 3500. Whenever you buy a jack for this vehicle, first check the weight for a safe lift.
Will a 2-ton jack lift a Silverado 1500?
Yes, a 2 ton jack will lift a Silverado 1500 as it comes in the lift range of the jack. A 2 ton jack has the potential to lift 4000 – 5000 lb. Depending on your Silverado’s model, if it falls under this capacity, you’re good to go. However, A 3 ton jack performs the best in this case.
You’ve seen that all the floor jacks in this post are fit for your Chevy Silverado. They meet all the requirements of the truck. It gives you an open choice to pick either floor jack for your vehicle. After the review, if you still need a hand in picking a floor jack for your Silverado that’s perfect for it, listen.
The TCE floor jack above is the right choice for you. It has a 6,500 lb jacking power with a 21” max jack height. And the jack is worth the money too. You can see more details and reviews on this floor jack on Amazon. The yellow button will take you to the site.