Googling the best floor car jack for home garage use for changing tires, brake pads, and doing maintenance? You’ve landed at the right place. Here we have the 3 best floor jacks that carry out safe operations and stand the test of time.
Let’s get started to know which one sits perfectly on your needs.
The Comparison Table of the Products
| Product | Torin T84025B |
TCE AT82001U |
Torin AT83006B |
|---|---|---|---|
| Load Capacity |
2.5 Ton (5,000 lb) | 2 Ton (4,000 lb) | 3 Ton (6,000 lb) |
| Items | Jack | Jack + Stand | Jack |
| Pump | Dual-piston | Single piston | Single piston |
| Min. Height |
3 15/16" (10 cm) | 5 1/4" (13.3 cm) | 5.9" (15 cm) |
| Max. Lift Range |
18.3 " (46.5 cm) | 13 3/8" (34 cm) | 20.9" (53 cm) |
| Weight | 60 lb (27 kg) | 30.8 lb (14 kg) | 45.4 lb (20.6 kg) |
| Material | Aluminum | Alloy Steel | Steel |
| Amazon Links |
View image | View image | View image |
Quick Navigation
Torin T84025B Best Floor Car Jack for Home Garage Use
Torin has a line of floor jacks, and if you want its floor jack for your home garage, this one is a nice option to put your bucks on. The 2.5 tons jack safely holds a weight of 5,000 pounds which means it lifts a range of cars out there.
Not only is checking the weight capacity important, but you also need to compare the vehicle’s ground clearance with the jack. In that regard, the minimum lift height of the jack is 3 15/16 inches, and that’s why it goes even under multiple sports cars.
While the maximum lift height of the unit is 18 5/16 inches. Safe to say that it’s a good height, and you can make as many repairs and maintenance as you want due to this. Since it carries out safe operations, you have peace of mind when working.
Thanks to the dual piston design, it lifts load quicker than most of the jacks available. It needs no more than seven strokes to reach the maximum height – as stated by the manufacturer. That said, it would surely save your efforts and time.
Made of steel and aluminum, the unit weighs heavy. It is 60 pounds and one of the heavyweight jacks here. However, it is cast with four wheels in which the front ones are fixed while the back rolls 360 degrees.
Two side handles help you displace the unit in your home garage for quick movements. Consisting of padding on the lower part of the handle, it prevents any damage to the car you are doing a repair job on.
Besides the features, the price tag makes it a reliable option. What to know about at what price it comes? Press the yellow button below. It takes you to Amazon.
TCE AT82001U Floor Jack for Home Garage Uses
Since the TCE car jack is made to lift 2 tons or 4,000 pounds weight, make sure your home garage has a car under this weight. It is a heavy-duty floor jack that is made of steel and has a weight of 30.9 pounds.
As a complimentary, the floor jack comes with two jack stands. These jack stands are sturdy enough with a pyramid-style foot that helps them stand tall. However, the legs are not welded, so make sure to perform maintenance jobs on hard floors.
The collapsed height of the jack stand is 10 13/16 inches. This height is a little more, but you can manage to fit under after jacking up your vehicle with the floor jack.
On the contrary, the maximum height of the jack stand is 16 9/16 inches which locks into position for safe performance. While this height is sufficient enough, the lift height of the floor jack isn’t high.
The maximum height of the jack is just 13 3/8 inches. So, you can only make a few repairs and tire changes due to it. Take note; it’s not ideal for cars with low ground clearance as its minimum lift height is 5 1/4 inches.
Unlike the Torin car jack, it doesn’t have side handles. Its handle is located at the top and gets out of the way when you are pumping. Four sturdy wheels that the jack consists of make maneuvering easy in the entire home garage.
In total, the pumping handle of the jack measures 16.7 inches. It has padding on the lower part for protecting dents on your car and knurling on the upper side for a tight grip on the jack while you pump.
This combo pack not only offers a punch of bells and whistles but a reliable warranty. Torin backs you for 2 years for this model. So, check the price and ratings on Amazon through the yellow button.
Torin AT83006B Car Jack for Home Garage Use
If your plan is to use a floor jack for cars, trucks, and SUVs, have no other than Torin’s floor jack. It is made to satisfy the needs of home garage owners and consists of 3 tons weight capacity, which turns out to be 6,000 pounds.
Sports cars with low ground clearance will not fit it well since they have low ground clearance. Its minimum height is 5 7/8 inches. So, make sure you compare it with the vehicle you want to use it on.
The best part of having this floor jack is the extra saddle. It measures 17 1/14 inches at the maximum height without a saddle. While the saddle adds the lift height to the floor jack and makes it 20 7/8 inches, indicating it is good enough to slide under for repair and maintenance.
Unlike the other two floor jacks, it’s a single-piston design. Although it takes a little more time to reach the maximum height, it operates safely. Made out of steel, its weight is 42.7 pounds which is fair for the features and quality.
For easy transportation, it consists of large swiveling wheels at the back and fixed casters on the front. Also, there’s a swing-away carrying handle for hand carriage. It is backed by a warranty of one year, so do check its ratings of this top-notch jack on Amazon.
Conclusion
These were the best floor car jack for home garage use. The Torin T84025B Hydraulic Low Profile Floor Jack meets the needs the most. It has sufficient weight capacity, sturdy wheels, a handle for transportation, and fair enough minimum and maximum lift height.
Find out more about this floor jack on Amazon from the button below.