Browsing for the best 20-ton air hydraulic bottle jack? If so, you’ve reached the right spot. This post will unbox the top air hydraulic bottle jacks that could lift up to 20 tons (40,000 lb).
Let’s first check out the overview of the bottle jacks.
BIG RED TA92006
- 27.2 – 51 cm lift range
- 32 lb item weight
- Air + manual jack
- Features carrying handle
SPECSTAR VH811
- 26 – 51 cm lift range
- 32.8 lb item weight
- Air + manual jack
- Two piece pump handle
AFF 5621SD
- 17.8 – 32.4 cm lift range
- 35 lb item weight
- Air + manual jack
- Carrying handle
Mophorn Q235
- 26 – 51 cm lift range
- 30 lb item weight
- Air + manual jack
- With carrying handle
The Comparison Table of the Products
| Product | BIG RED TA92006 |
Mophorn Q235 |
AFF 5621SD |
|---|---|---|---|
| Load Capacity |
20 ton (40,000 lb) | 20 ton (40,000 lb) | 20 ton (40,000 lb) |
| Min. Height |
10-7/16" (27.18 cm) | 10-1/4" (26 cm) | 7" (17.8 cm) |
| Max. Height |
20-1/16" (51 cm) | 20" (51 cm) | 12-12/16" (32.4 cm) |
| Pressure Range |
100 - 175 PSI | 120 - 200 PSI | 110 - 120 PSI |
| Manual Operation |
Yes | Yes | Yes |
| Weight | 32 lb (14.5 kg) | 30 lb (13.6) | 35 lb (15.9 kg) |
| Carrying Handle |
Yes | Yes | Yes |
| Size | 11.4 x 11 x 7.3 | 11 x 11 x 8.3 | 15.7 x 7.8 x 7.8 |
Best 20 ton Air Hydraulic Bottle Jack - BIG RED TA92006
- Manual and air hydraulic jack. Either pump it or use the air pressure system
- Features a carrying handle that helps you move the jack with ease.
- 20 inches maximum reach.
- Heavy-duty steel structure.
- Requires at least 11 inches of clearance to fit under the jack points.
This BIG RED is the best 20 ton air hydraulic bottle jack could lift up to 40,000 lb load that includes cars, SUVs, heavy-duty trucks, farming vehicles, and whatnot. The jack also has a manual operation if you have no air pressure. Speaking of it, this jack needs 100 – 175 PSI to lift the load.
This product uses an oversized piston for increasing the load capacity. The jack is made of heavy-duty steel rods and can easily hold up to 40,000 lbs capacity. It has a manual pump operation that operates with oil. So, you don’t need electricity or air pressure to use it.
You will need to provide at least 27.18 cm clearance for its installation. It is its min-height. With air or manual operation, this model can lift heavy loads up to 51 cm off the ground, allowing more space for sliding a jack stand if you’re using it for vehicles.
This item could easily be carried out from one place to another with its carrying handle. And the jack is not as heavy as floor jacks. It weighs 32 lb.
Since the jack can hoist a 20-ton load, it will need much weight for lowering, which won’t be available in most cases. This leads to incomplete lowering of the jack. But this jack has a hack for that. It has two springs along with the cylinder – which can be seen in the image – that helps lower the jack upon releasing the valve.
Overall, this is one of the best hydraulic jacks out there because it can be used in different conditions. You can find more about this product, its ratings, reviews, and price by clicking the image.
Mophorn 20 ton Air Hydraulic Bottle Jack
- It has a 16.8 cm lift range. It can add 16.8 cm clearance to the load.
- Equipped with two springs that help to quickly lower the jack.
- Manual and air pressure operation.
- 40,000 lb maximum safe bearing capacity.
- Fewer ratings than the above BIG RED jack.
Here comes another best air hydraulic jack that features the same load capacity – 20 tons.
This jack weighs around 30 lbs and is made of heavy-duty steel rods. The weight capacity makes it one of the best hydraulics for car repairs because the load capacity can be placed on different types of vehicles like trucks, SUVs, or even cars.
The air pressure required by this model is 120 – 200 PSI (Pounds per Square Inch). It’s not that much different than other models in this list but if you’re looking to buy a tool that runs on a high air pressure compared to the other models on the list then you must go with the Mophorn 20-ton Bottle Jack.
One unique feature about this model is its well-balanced cylinder which creates less vibration when in use hence decreasing chances of user fatigue. Also, the glide pump allows you to operate the jack without any air pressure.
If we explore its lift range, this one is pretty much similar to the previous model. It has a 26 – 51 cm lift range. That means you’ll need 26 cm min-height for its installation. And then it will do the rest, raising the load to 51 cm.
It features a circular rough saddle top that makes a strong bit on the jack point which in return delivers a secure lifting without any sliding. The model won around 219 positive ratings online that could be found by clicking the picture.
American Forge & Foundry 5621SD 20 ton Low Profile Air Bottle Jack
- Best for low clearance load. It needs just 7 inches of space to fit in.
- Small in size compared to other floor jacks on the list.
- Two-piece pumping handle, good for compact storage.
- Solid and sturdy base for stability and support.
- Expensive air hydraulic jack.
Another 20-ton model that’s currently on sale is the American Forge & Foundry 5621SD Low Profile Air Bottle Jack which has a different design than the rest of the models listed above. First of all, its cylinders are made of cast iron hence making it more durable than most models out there.
The manufacturer claims that it can lift up to 40,000 pounds at once hence suitable for heavy-duty tasks like lifting military vehicles. Speaking about it, this model has an impressive height range considering how short it looks – between 7″ and 12″.
Unlike other products on the list, this one needs low clearance for installation. You just need to provide at least 7 inches height which most vehicles have for the operation. That’s why this jack is named the low-profile 20-ton air hydraulic jack. However, it will lift your car to 12 inches, lower compared to the other products.
It works best when placed under smaller cars but if you’re looking to use air pressure, you’ll need 110 – 120 PSI for lifting. Just like other products on the list, this one also has a carrying handle that helps you easily move it around or carry it from point A to B.
Want to know more about this jack? If so, tap the image above.
How many PSI is a 20 ton bottle jack?
Depending on the manufacturer, air hydraulic bottle jacks need 100 – 200 PSI pressure to lift the load it is designed for. The BIG RED air jack can be operated under 175 PSI, the Morphorn jack operates from 120 – 200 PSI, and the AFF jack requires 110 – 120 PSI pressure for the lifting.
How much can a 20 ton bottle jack lift?
40,000 lb
A 20 ton bottle jack – be it air or manual – can lift a maximum of 40,000 lb or 18143.7 kg. It is the safe bearing capacity for the 20 ton jacks. Avoid overloading the jack, otherwise it may cause damage to the load or it could hurt you as well.
Conclusion
You’ve seen that almost all the best 20 ton air hydraulic bottle jacks have similar features apart from a few. So if you need a hand in choosing the best 20-ton air hydraulic jack from the list, the BIG RED TA92006 is one.
It has a higher lift range, yet hoisting 40,000 lb. It runs on lower pressure than the other jacks. And if even that’s not available, the glide action pump got you back. You would be amazed that this model also gathered over 1,102 positive ratings online which you can find by clicking the button below.