Looking for the best floor jack for Honda Civic and Honda Accord? If so, you’ve reached the right spot. This article unboxes the jacks that can lift Honda Civic and Accord.
Before getting into the details of the floor jacks, let’s first go through the comparison table of the products.
An Overview of the Honda Floor Jack
NOS NSJ0302
- 6000 lb load capacity
- 3.75 – 19″ lift range
- 58 lb item weight
- Dual piston pump
TCE AT830003XLU
- 6000 lb load capacity
- 3.74 – 18.9″ lift range
- 55.6 lb item weight
- Aluminum jack
Daytona MX64200
- 6000 lb capacity
- 5 – 18.25″ lift range
- Dual piston
- Steel jack
The Comparison Table of the Products
| Product | NOS NSJ0302 |
TCE AT830003XLU |
Daytona MX64200 |
|---|---|---|---|
| Load Capacity |
3 ton (6,000 lb) | 3 ton (6,000 lb) | 3 ton (6,000 lb) |
| Weight | 58 lb (26.3 kg) | 55.6 lb (25 kg) | - |
| Min. Height |
3.75" (95 mm) | 3.74" (95 mm) | 5" (127 mm) |
| Max. Height |
19" (482 mm) | 18.9" (480 mm) | 18.25" (463 mm) |
| Pump | Dual-piston | Dual-piston | Dual-piston |
| Material | Aluminum | Aluminum | Steel |
| Fit for Honda |
Civic | Accord | Both |
Best Floor Jack for Honda Civic - NOS NSJ0302
- Super quick lifting, thanks to the jack’s two parallel pistons.
- The handles on each side of the jack are handy for carrying and positioning under the lifting point.
- Aluminum material makes it lightweight and easy to carry.
- Requires just 3.75 inches (9.5 cm) clearance to fit under Honda Civic
- Load Capacity: 3 ton
- Minimum Lift Height: 3.75 inches
- Extended Height: 19 inches
- Pump: Dual piston
- Weight: 58 lb
- Material: Aluminum
- Color: Black & Red
- Size: 28.4 x 13.8 x 6.3 inches
- Brand: Sunex Tools
- Manufacturer: NOS
- Part No. NSJ0302
- A bit pricey because of the dual pistons and aluminum structure
This model features a 6000 lb load capacity, raising the Honda Civic quickly. Your car weighs around 3,000 lb, and the floor jack can smoothly lift it with the 3-ton power. The jack’s 3.75 inches min-height allows you to slide it under your 6.7 inches clearance Honda Civic easily.
Speaking of height, the floor jack can be extended to 19 inches, thus lifting your car almost one and a half feet off the ground. It leaves more than enough space under the vehicle for repair and maintenance, let alone changing a tire that needs just a few inches of lifting.
This 19 inches max-height of the jack will be helpful if you want to creep under the car. It gives you more space for getting below. Keep in mind to install some jack stands before creeping under for safety.
Since floor jacks are heavy, and it is not easy to carry them from point A to B, this NOS floor jack is lighter than other steel floor jacks. It has an aluminum body that makes it 58 pounds. It features two side handles that help you move it around or position it under a jack point.
You also can roll it over the garage floor by grabbing it from the handle. The two front and two back swivel wheels deliver 360 degrees of maneuverability. For quick lifting, the brand has integrated two parallel pumps. It operates fast to save you time and energy.
If you want to see its ratings, price, and other customer reviews, hit the button below to find it on Amazon.
You May Also Like: What Size Floor Jack For Honda Odyssey
Best Floor Jack for Honda Accord - TCE AT830003XLU
- An extensive round saddle for more contact area, hence secure lifting.
- Features almost one & a half feet extended height, enough for installing a jack stand.
- Fast lift and lightweight body.
- Two-piece long handle for easy pumping.
- Load Capacity: 3 ton
- Minimum Lift Height: 3.74 inches
- Extended Height: 18.9 inches
- Pump: Dual piston
- Weight: 55.6 lb
- Material: Aluminum
- Color: Silver & Blue
- Size: 28.74 x 12.6 x 7.08 inches
- Brand: TCE
- Part No. AT830003XLU
- Occupies more room because of its size.
- Expensive item.
Here is a floor jack for your Honda Accord. The TCE floor jack has the same features as the above jack. It comes with a 3-ton load capacity which ensures that you can pick either floor jack and use it for either Civic or Accord.
The jack’s handle comes in two pieces for easy storage. They can easily be detached to keep them in low storage. The handle is around 43 inches long, delivering easy operation when attached. Its lower part is foam padded, so it does not damage your car if it hits it while pumping.
Moreover, you can securely lift your Accord with the jack’s 3.8 inches-wide saddle. The only part of the jack comes in contact with the jack point. It is also padded to increase friction and prevent unexpected sliding.
Made out of aluminum, it weighs 55.56 pounds. Compare, and you’ll find it the least-weighted floor jack on the list. The overload protection system makes it a great pick.
To help you transport, there are two side handles attached. So, you can carry it from point A to point B without hurdles. Four wheels on the jack add transportation ease. However, they are more challenging to maneuver than advertised.
The minimum lift weight of the floor jack is 3.74 inches. Considering the ground clearance of the Honda Accord, there’s no doubt the floor jack will quickly get under this vehicle.
About the maximum lift height, it will raise your car 18.89 inches from the ground. And this height is more than enough to make changes and repairs under Honda cars. Keeping its overall rating and price, we’d suggest you check the price on Amazon by clicking below.
You May Like: What Size Jack For GMC Sierra 1500
Daytona Heavy Duty Floor Jack for Honda Vehicles
- Heavy duty jack, best for Honda vehicles.
- Wide front wheels deliver stability.
- Rubber padded handle’s lower part for protection.
- Inexpensive jack compared to Aluminum products.
- Load Capacity: 3 ton
- Minimum Lift Height: 5 inches
- Extended Height: 18.25 inches
- Pump: Dual piston
- Material: Steel
- Color: Orange
- Brand: Daytona
- Part No. MX64200
- No side handle like with the Sunex and TCE jacks.
- Steel material makes it a bit heavy.
The Daytona floor jack is made to lift the 3-ton weight. That means you can conveniently raise Honda Accord and Civic through it. The manufacturer has made it with steel, so it lasts for many years to come.
The minimum lift height of the floor jack is 5 inches. Due to this height, it readily goes under the Honda cars and lifts them safely. Know that it raises the vehicle to 18 1/4 inches from the ground to ensure you can make multiple repairs and maintenance under it.
Integrated with dual-piston, it does keep you from additional efforts. It takes no more than seven strokes to reach the maximum height. That way, less time and energy are consumed to finish the job.
There is a large handle attached to the floor jack. On the top part of the jack is a knurling design that helps you make a firm grip on the handle. While the lower part has foam padding to prevent the cars from dents and color rip off.
Take note that the saddle of the unit is 3.8 inches in diameter. Due to the wideness and rubber material, the lifted car is safe and firm on the jack. It is also removable, so you can buy a new one if it goes worn out in the coming years.
The saddle is not only removable but also swivels easily to reach the jack point under Honda Accord and Civic. For easy transportation, the jack consists of four wheels. The front two wheels of the jack are fixed, while the back ones swivel to help you make smooth turns.
At this price point, it is a bang for the buck. So, check it out on Amazon through the yellow button and know if it fits your bill.
Outro
These are the best floor jacks for Honda Civic and Accord. We’ll suggest you buy NOS NSJ0302 Best Floor Jack for Civic. This floor jack is made to last, have minimum and maximum lift height compatible with these cars, and ensure a safe lift. Or if you’re looking for an Accord jack, click on the TCE model.
Check NOS jack price now on Amazon and make an informed decision.
Related: The 3 Best Floor Jacks for Van