Remember that not each jack stand is helpful with your small car. Only the best jack stands for low cars get the job done, in this case. That said, your best choice is to select one of these jack stands mentioned below.
Jack stands on this list is trustable in the market. Low profile, with top-notch built and warranty, makes them stand out. On top of that is their exceptional functionality that not every jack stand has.
Enough with the collective praises; let’s get towards reviewing and see what each has to offer.
An Overview of the Low Jack Stands
BIG RED T43004
- 6000 lb load capacity
- 10.8 – 15.6″ lift range
- 10.2 lb item weight
- Aluminum stands
Amazon Basics SW-STJK03
- 6000 lb load capacity
- 10.35 – 16″ lift range
- 11.77 lb item weight
- Steel stands
Sunex 1003AJ
- 6000 lb load capacity
- 10.6 – 15.4″ lift range
- Red & Silver
- Aluminum stands
Pro-Lift T-6906D
- 6 ton lb load capacity
- 16 – 23.5″ lift range
- 26.4 lb weight
- Dual lock system
The Comparison Table of the Products
| Product | Amazon Basics SW-STJK03 |
BIG RED T43004 |
Pro-Lift T-6906D |
|---|---|---|---|
| Load Capacity |
3 ton (6,000 lb) | 3 ton (6,000 lb) | 6 ton (12,000 lb) |
| Min. Height |
10.35" (26.3 cm) |
10.8" (27 cm) | 16" (40.4 cm) |
| Max. Height |
16" (40.4 cm) | 15.6" (39.7 cm) | 23.5" (60 cm) |
| Pair | Yes | Yes | Yes |
| Weight | 11.77 lb (5.3 kg) | 10.2 lb (4.6 cm) |
26.4 lb (12 kg) |
| Material | Steel | Aluminum | Steel |
The Best Jack Stands for Low Cars - BIG RED T43004
- Meets ASME PALD standard for safety and security.
- Features pin locked system to prevent unexpected dropping.
- The pin is connected to the body via a chain so that it doesn’t go away.
- The aluminum body makes it lightweight and easy to carry.
- Load Capacity: 3 ton
- Minimum Lift Height: 10.8 inches
- Extended Height: 15.6 inches
- Locks: Single
- Weight: 10.2 lb
- Material: Aluminum
- Color: Silver & Red
- Brand: BIG RED
- Part No. T43004
- No dual lock system.
- Lower maximum height.
The reliability of these jack stands comes with their brand name. There are tons of BIG RED’s jack stands, while this is the best for lowered cars. Whether you have a Crew Cab Ford F250 or an Audi TT roadster, you can’t go wrong buying this stand.
Note that each strand of the pair holds 3 tons of weight. That means you can use one for your car under 6,000 pounds, while the couple of two will benefit a jeep or heavy vehicle like a truck.
Made of aluminum and weighing 10.2 pounds, the jack stand is straightforward to displace. You’d have to put no effort into lifting, but they lack handles.
Of all the jack stands listed here, this one has the lowest height to the ground. It is 10 ¾ inches at its lowest and highest at 15 5/8 inches. So, if you have a car too dropped to the ground, worry not and just place these jack stands.
Six-pointed locks backed with the pin locking system make it a safe unit. It allows you to readjust height quickly while freeing from the stress of your car falling when there’s no jack stand to support it.
Along with the budget-friendliness, one year warranty draws attention to these jack stands. Don’t you think that is the best package available? Check out the price and have it to save your bucks.
Sunex 1003AJ Lowered Jack Stands
- It can be locked at 6 different heights.
- You just need 10.6 inches of clearance to fit in, which can be provided by a jack.
- 7+ inches wide circular base for stability and firm support.
- Pin lock safety system
- Comes in a pair.
- Load Capacity: 3 ton
- Minimum Lift Height: 10.6 inches
- Extended Height: 15.4 inches
- Locks: Single
- Material: Aluminum
- Color: Red & Silver
- Size: 6.3 x 7.6 x 12.9 inches
- Brand: Sunex
- Part No. 1003AJ
- Expensive yet worth the expenditure.
Like the Big Red jack stands above, Sunex has the same building. Its jack stand also comes round with six locking positions integrated. Thanks to this, it stabilizes your car and minimizes the chances of accidents.
Before buying this pair, make sure that your car weighs less than 6,000 pounds. These jack stands can hold 3 tons, which is the pair’s collective capacity.
It is the best low-profile jack stand for cars like VW GTI Mk4 that are low to the ground. The minor height it measures from the ground is 11.25 inches, while it rises high to 17 inches.
The saddle on the jack stands is 2.2 x 2.0 inches, due to which the lifted car is stable enough. Stability and durability are the prominent features the manufacturer has made them with.
Compared to all units, this is the most expensive jack stand pair. However, that’s for its features, including its lightweight build. So, wouldn’t you want to check out its price at least? Click the button above to know.
Amazon Basics Steel Jack Stands for Low Cars
- Rust-proof polishing delivers long-lasting performance.
- Heavy-duty jack stands.
- The square-wide base gives stability to the load.
- With over 11,016 positive ratings online.
- Load Capacity: 3 ton
- Minimum Lift Height: 10.35 inches
- Extended Height: 16 inches
- Locks: Self-locking
- Weight: 11.77 lb
- Material: Steel
- Color: Black & Red
- Size: 7.4 x 6.8 x 10.8 inches
- Brand: Amazon Basics
- Part No. SW-STJK03
- Heavier and big size jack stand than the other stands on the list.
Are you short on budget and still want the best jack stand for your low car? Amazon Basics stands to fit your bill the best. It is the cheapest unit in all of these jack stands and still comes in pairs.
The combined weight lifting capacity of both jack stands is 3 tons. That means you should use them in pairs for your car with 4,000 to 5,000 pounds.
Where the two jack stands above have a round shape built, it is made in a pyramid shape. The material difference is also there between them. These stands are manufactured with steel which makes them heavy, of course.
The handle on the jack stand provides a good grip when you want to displace the unit. It is firm, but there’s little space to quickly settle big hands on it. This ratchet-style stand frees you from pin technology and is self-locking.
It has a 12-inch minimum height and 18 inches maximum from the ground. In conclusion, you can easily change the oil in your car and do regular maintenance if you do that yourself.
Deals like this get out of stock soon, so why not check this pair now?
Pro-Lift T-6906D Low profile Jack Stands
- Integrated with two lock systems for maximum safety.
- With 12,000 lb capacity – the highest on the list.
- It can be adjusted at multiple heights.
- Sturdy steel construction.
- Load Capacity: 6 ton
- Minimum Lift Height: 16 inches
- Extended Height: 23.5 inches
- Locks: Dual
- Weight: 26.4 lb
- Material: Alloy Steel
- Color: Red & Gray
- Size: 18 x 12 x 10 inches
- Brand: Pro-Lift
- Part No. T-6906D
- Weighted products with no carrying case.
Maintaining high ratings is challenging and magnificent, with 5k+ reviews. So, if you are looking for the best jack stands for low cars with a strong history, you’ve found one. These gray and red jack stands are best at what they do.
The pyramid style 9 x 10 inches jack stands have a dual locking mechanism. Pin installed on the stand; make sure to hold your car firm in the air to avoid any consequences. It has a ratchet that you can use to displace the unit from one place to another.
One thing you should be aware of here is the minimum height of the unit. It measures 17.5 inches from the ground and raises your car to 23.5 inches. Your car should be at least 17.5 inches to get the most out of it.
As it is made with steel, the stands are 26.8 pounds which is pretty heavy from all others. Besides, the stand holds 3 tons of weight, making it suitable for small cars like the Chevrolet Corvette C8, which is under 6,000 pounds.
It’s a pair in a reasonable price range. So, forget not to click the button above and check out more about it.
Conclusion
To help you have the best jack stands for low cars, mentioned above are the finest options. Our pick is the BIG RED T43004 aluminum stand, and AmazonBasics Steel Jack Auto Stands in steel for their durability, functionality, and fair price.